bing tracking image

Convert-A-Ball Pintle Mounting Bar Review - 2013 Nissan Frontier

content loading

Customers compare AMPC2 to these similar products




Products Featured in this Video



Review of the Convert-A-Ball Pintle Mounting Bar on a 2013 Nissan Frontier


Today on our 2013 Nissan Frontier we'll be test fitting the Convert-A-Ball Cushion Adjustable Pintle Mounting Bar for Two Inch Hitches Rated at 10,000 Pounds, part number ampc2. Before I began our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17-1/4 inches. Keep in mind that this measurement may vary due to tire size, hitch style or after-market accessories. We'll now begin our test fit in the drop position by sliding the shank of the pintle mounting bar into the opening of the hitch and securing it with the pin and clip.

We can now measure from the ground to the center of the second hole from the bottom. We'll get a measurement of about 13-1/4 inches. Now from the ground to the center of the third hole from the bottom is 15 inches. If your vehicle's hitch height matches ours and your trailer's ride height matches either of these two measurements this will be an appropriate ball mount for you. We can now flip the pintle mounting bar into the rise position and again measure from the ground to the second hole from the bottom.

We'll get a measurement of about 16-3/4 inches. Also from the ground to the third hole to the bottom is 18-1/2 inches. Once again if your trailer's ride height matches either of these two measurements this will be an appropriate ball mount for you. That will complete today's test fit for the Convert-A-Ball Cushion Adjustable Pintle Mounting Bar for Two Inch Hitches, part number ampc2 on our 2013 Nissan Frontier.


Info for this part was:

Employee Patrick B
Video Edited:
Patrick B
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Sue W
Video Edited:
Sue W
Employee Rick A
Test Fit:
Rick A
Employee Matthew K
Test Fit:
Matthew K
Employee Cole B
Test Fit:
Cole B
Employee Randy B
Test Fit:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.