Installing the Curt Trailer Hitch Receiver on your 2018 Lexus RX 350 Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

If you do not have the tow prep package for your 2019 Lexus RX 350, there is not a plug for your t-one harness. According to Lexus, if you do not have the tow package for this vehicle, you are not to do any towing with it. I did some online research…

I did some checking and it looks like your 2019 Lexus RX 350 has a towing capacity of 3,500 lbs. As long as your trailer weighs less than that you are totally fine and would not need to upgrade anything on the vehicle. If you need a trailer hitch the…

Yes it does. Our website can be fun sometimes. I can confirm that the Draw-Tite Trailer Hitch item #75540 does fit the 2019 Lexus RX 350 including the F Sport model. I have linked an installation video below so you can see how to get it set up. If…

Since the Curt Hitch part #C13272 installs by simply raising up into position at the rear of your vehicle and then bolting it into place there would be no need for you to remove the rear damper or any body panels to installation. If you wanted to do…

If your 2017 Subaru Crosstrek has an automatic transmission then no, it cannot be flat-towed with four wheels down. It must instead be towed on a trailer with all four wheels off the ground. However, if your 2017 Subaru Crosstrek has a manual…

The Hidden Hitch trailer hitch 70594 is now discontinued (since 2011) but I was able to confirm with my technical contact there that this hitch fits 1999 through 2004 Jeep Grand Cherokees. Hitch hardware is intended for a single use only so the new…

There's a possibility you could add enough washers to the install hardware of the Draw Tite hitch part #75540 to allow it to fit under the rear bumper without trimming but since that would void the warranty of the hitch we cannot recommend that.…

Since we have not had a chance to install the hitch on 2016 Lexus RX350, I have attached the representative photo used by the manufacture of the hitch, installed on the vehicle from the instructions, which I've linked to this page for you. The…

The Curt Trailer Hitch Receiver part #C13394 is a great option for the 2020 Lexus RX 350L to carry a bike rack for the Roadlite Canyon Carbon Fiber bike. The Curt will give you a 2" hitch receiver on the back of the Lexus and easily installs…

I have a solution for you, but the frame of the Lexus RX 350 is different than the frame of the Lexus RX350L, so if you've got a 2018 Lexus RX 350L you won't be able to use the Stealth Hitches Hidden Rack Receiver - Custom Fit - 2"…

Both of the trailer hitches that fit your 2018 Lexus RX 350 will give you the same amount of clearance. The etrailer #e94AR and Curt #C13272 that fit your Lexus each have approximately 15-1/2 inches of clearance from the ground to the top of the…