Installing the Curt Trailer Hitch Receiver on a 2024 Hyundai Santa Fe Video

Hey Chris, the CURT Class 3 Trailer Hitch #C37RV won't require any bumper modification, but the etrailer Class 3 Trailer Hitch will require some underbody panels/fascia to be trimmed for install.

Hey Ken! The only hitch we have for the 2025 Kia Sorento hybrid is the Curt item #C37RV. This is a class III hitch with a 2" receiver. It is custom fit and bolts to your Kia with included hardware. I really like the Curt Hitch item #C37RV…

Hi Chris, Yes, you'll need the Curt Trailer Hitch Receiver #C37RV. This class III trailer hitch has a 4,000lb maximum towing capacity and 600lb tongue weight capacity, but you'll still want to refer to your Santa Fe's owner manual to…

Hey Roger, Yes, the Curt Trailer Hitch Receiver #C37RV is listed as a fit for all models of the 2025 Hyundai Santa Fe. If you plan on installing this yourself then I recommend checking out Ryan's installation video below for step-by-step…

Hello Jim, thanks for reaching out. According to Kia, the tow package connections on a 2024 Sorento will be under the driver's side rear bumper cover. We have not been notified of any changes for the 2025 models, but it is too soon to say for…

Hey Steve, we have the Curt hitch part #C37RV that fits your 2025 Kia Sorento Hybrid SX Prestige model. For trailer wiring we only have universal options at this time like with the Curt #C59236.

I have linked an installation video for the etrailer Trailer Hitch Receiver #e28AR which was installed on a 2021 Hyundai Santa Fe Hybrid near the bottom of the page. This is the newest hybrid we have been able to get into our shop to have a receiver…

Hey Steve, yes the exhaust does need to be lowered to install the Curt Trailer Hitch Receiver #C37RV. The easiest way to do this is to use an exhaust hanger tool which can be found at just about any hardware store. If you can't get a set of…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Glen, We have a trailer hitch fit for your 2025 Hyundai Santa Fe hybrid, but not an etrailer-branded hitch. The hitch that fits your Santa Fe is from Curt, and is the following part number: - Curt Trailer Hitch Receiver #C37RV

Hi Alberto; the Curt #C37RV is what you need for your 2024 Hyundai Santa Fe Caligraphy Hybrid. Curt redesigned the older hitch so this fits all models of the 2021-2025 Santa Fe, including your Caligraphy Hybrid. This is a Class III hitch with a…

Hey Carmin, thanks for reaching out! The hitch and wiring I recommend for your 2024 Kia Sorento SX Prestige PHEV is the following: - Curt Trailer Hitch Receiver #C37RV - Curt T-Connector Vehicle Wiring Harness #C99DR - Mounting Brackets #18144 and…