bing tracking image

Demco Dominator Tow Bar Installation - 2019 Jeep Cherokee

content loading

Customers compare DM9511008 to these similar products




Products Featured in this Video



How to Install the Demco Dominator Tow Bar on a 2019 Jeep Cherokee


Speaker 1: Today our 2019 Jeep Cherokee and we're going to be taking a look at the Demco Dominator tow bar, part number DM9511008. This is what our Dominator tow bar looks like when it's hooked up to the front of our vehicle. It's going to be one of five main components on a flat tow setup. The other four are going to be your safety cables, your wiring, your braking system, and your base plate.One of the great things about the Dominator tow bar is it's a non-binding tow bar, which means that you can unhook your vehicle at any point in time, even on unlevel ground. The other thing that's really nice about this tow bar is our safety cables come pre-installed on the tow bar. You notice the two channels here, our safety cable runs through this.

This helps keep the safety cable from dragging the ground while we're in motion.One other thing that's going to set this tow bar apart form others is this rod right here. What this is for, this is to allow you to put on your umbilical cord from your wiring system, which is also going to help keep it off the ground while you're traveling. Each arm is going to be self-supporting. We're going to have a pin here at the end that will rest inside, and we can do this on either side. We'll lift, twist, and it locks it into place.

We can do the same thing with this one. We can go to either side, lock this out, so we have them like this, or we can do them both on the same side. And on our bag, hold everything in place, and stay stored on the back of our RV.Another thing that's going to set this tow bar apart from others is it's going to allow you to have a 1 1/2" riser drop. By simply removing these bolts, you can spin this section over and it gives you 1 1/2" drop. Each arm will lock into place, and you'll have a release lever to unlock it.

Simply push it in and you can slide the arm in.Both of our safety cables are going to have a vinyl coating on them that's going to help not only protect the cables, help them last a really long time, but it's also going to help protect from marring up the tow bar. One of the things I really like about this tow bar is the rugged look. I like this kind of goldish copper color. Unlike some of the other tow bars that are more of a smooth finish, it kind of goes with the trail hawk look of the Jeep.That'll do it for a look at the Demco Dominator tow bar, part number DM9511008 on our 2019 Jeep Cherokee.


Info for this part was:

Employee Joshua S
Video by:
Joshua S
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Schuyler H
Video by:
Schuyler H
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Installed by:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Shane H
Test Fit:
Shane H
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.