bing tracking image

Dexter Trailer Axle Beam w/ Standard Spindles - 3,500 lbs Installation

content loading

Customers compare t3584f-8974 to these similar products




Products Featured in this Video



How to Install the Dexter Trailer Axle Beam w/ Standard Spindles - 3,500 lbs


Today on our tandem axle trailer we're going to be installing the new Dexter Trailer Axle Beams with standard spindles 89 inches long and a 3,500-pound capacity, part number T3584F-8974. When removing the axle, we're just going to cut the old newel bolts off, as they will not be reused. Each process we do here to one side will get repeated identically on the opposite side. With bolt assemblies removed, we can pull the axle out of our trailer and prepare to install the new axle. We're now ready to put our axle in place. Here is the manufacturer's tag, and the tag will go to the rear of the trailer. Then, apply at the spring seat on the axle with the nib that sticks out the top of the leaf spring pack. Once you have them lined up, we'll use the new U bolt kit to secure it.

Our plate will go on the bottom, U bolt coming down over the top of the axle, and both inside and outside the leaf spring pack. We'll install our fasteners finger-tight at first, then we'll snug them down and torque to specifications as indicated in the instructions. That will complete the install of our new Dexter Trailer Axle with standard spindles, part number T3584F-8974. .


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.