DIY 2017 Toyota Sequoia Installation for the Draw-Tite Front Mount Trailer Hitch Receiver Video

We do have something for you. But if when you say standard, you mean the 6-1/2' bed then the answer is no the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLT2307 and #TLR3500 are not what you would want because they only fit the 5-1/2'…

If by 'install kit' you're referring to a wiring adapter like the #3040-P you'd looked at, then yes you'll need a wiring adapter to install a brake controller on your 2010 Toyota Sequoia with the factory 7-way. If you haven't…

Starting with the tow hooks, those will remain on your 2020 Toyota Tundra when installing the Draw-Tite Front Mount Trailer Hitch Receiver #65080. They will be temporarily removed, but will be bolted back on. In regards to the hole, there is a small…

The front mount trailer hitch options for a 2019 Toyota Tundra, the Curt Front Mount Trailer Hitch Receiver part #31198 or Draw-Tite Front Mount Trailer Hitch Receiver part #65080 will both work of TRD models. That said, you will either need to cut a…

Adding a hitch extender will reduce the maximum tongue weight of your hitch receiver by 50%. The Yakima EXO System with 2 Bike Rack and Enclosed Cargo Carrier - 2" Hitches, part #Y34ZR, weighs 166lbs, empty. If the reduced maximum tongue weight…

Yes, that is correct. In order to remove the skid plate for your 2018 Toyota Tundra you would have to uninstall the Draw-Tite Front Hitch item #65080.

The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65080 is my recommendation for you based on cost and features. The installation of this hitch is nearly identical to the Curt #31198. The Draw-Tite has a measurement of 7-1/2…

Both the Draw-Tite #65080 and Curt #31198 front mount hitches can still be installed if your 2021 Toyota Sequoia has that front skid plate, but it does require removal and trimming during the installation. So it fits, it just doesn't fit right up…

According to Curt, if the truck is equipped with the skid plate, the skid plate will need to be removed or have the 4 inch diameter hole cut into it to allow for oil changes. The hitch cannot be removed each time the oil needs changing, because the…

The Draw-Tite front mount hitch #65080 is listed as fitting all styles of the 2008 Toyota Tundra. I have included a link to the installation instructions for you to view. The hitch has a 500 pound vertical load capacity but you need to determine the…

For a spare tire carrier that will accommodate a spare tire with a 5 on 5 inch bolt pattern you could use a Trailer Spare Tire Carrier #DL22128. If you are interested in a hitch mounted spare tire carrier for a 2x2 hitch shank I recommend Curt…

I measured the u-bolts in the Fulton Hi-Mount Spare Tire Carrier #FHDSTC0101 and found them to have the following dimensions which I have noted on the linked photo. Overall length 6-1/2-in. Inside width 2-in. Outside width 2-5/8-in. Material diameter…