bing tracking image

EcoHitch Stealth Trailer Hitch Undercover Access Hole Cover Installation

content loading

Customers compare 306-XA2002 to these similar products

Products Featured in this Video

How to Install the EcoHitch Stealth Trailer Hitch Undercover Access Hole Cover

Speaker 1: Today on our 2018 Tesla Model 3, we're gonna be taking a look at, and I'm gonna show you how to install, the undercover access hole cover for EcoHitch Stealth Trailer Hitch Receiver, part number 306-XA2002.Now with the EcoHitch, this is another accessory that you can pick up. What this is gonna do is for the EcoHitch, when you remove that receiver tube, this is gonna go in place of that to give you a nice clean look, and maintain the aerodynamics of the vehicle.It's also gonna have a rubber seal, that's gonna seal to keep dirt and debris from getting up inside of your receiver tube. Now how this stays on, it's magnetic. There's a large magnet here. It's gonna slide up inside the receiver tube to hold it in place. It's gonna be an aluminum construction with a black powder coat finish.

It's gonna resist any rust or corrosion. It's gonna come with all the necessary hardware.This cut out here is gonna face the front of the vehicle. This arrow's gonna face the driver side. Magnet is gonna slide up on the passenger side inside of the receiver tube here, just like that, and slide it into place.When you're ready to add your receiver, simply pull it out, add your receiver, and then your bolt, and you're ready to go.Once you put your receiver back in place, the bolt that you put in, you wanna make sure that you torque that to the specifications on the instructions. You're gonna need to do that anytime you take it out and put it back in, or reinstall it.That'll do it for a look at and installation on the EcoHitch undercover access hole cover for EcoHitch Stealth Trailer Hitch Receiver, part number 306-XA2002, on our 2018 Tesla Model 3..

George F.


Does this undercover access hole cover work for the StealthHitches, LLC hitch? What are the dimensions of the EcoHItch cover?Thank you in advance for responding!

Etrailer Expert

Heather A.


I took a look at the installation instructions for the stealth hitch you mentioned (not to be confused with a Ecohitch Stealth hitch) for a 2018 Tesla Model 3. The installation instructions from the stealth hitch require you to trim an 11 by 2 3/4 inch rectangular hole in the fascia. The undercover access hole cover part # 306-XA2002 is designed for the ecohitch. The Ecohitch Stealth trailer hitch receiver part # 306-X7373 for the 2018 Tesla Model 3 calls for the use of a 4 inch hole saw to create a circular hole in the fascia. The cover part # 306-XA2002 will not work with the stealthhitch.

Info for this part was:

Employee Cole B
Installed by:
Cole B
Employee Chris R
Video Edited:
Chris R
Employee Shane H
Test Fit:
Shane H
Employee Jonathan Y
Video by:
Jonathan Y

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.