Mount: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control on a 2019 Ford F-150 Video

Thanks for the pictures! No, I am sorry Richard you can not. The B&W Continuum item #BW78FR only works with frames that are 5" and 6" tall. Instead, I recommend using the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control…

For the Tall Safety-Chain Loops for Reese Elite Series Under-Bed Gooseneck Trailer Hitch #RP58468 you can use safety chain #FCHA0070324. Reese has performed a test fit and this chain works with the loops.

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

Yes you could use a long enough and correct diameter nut and bolt to secure the safety chains to your trailer if you wanted or you could use the Buyers Products weld on safety chain retainer #3375471000 that you referenced as well.

It does appear you are going to be able to flip the axles on your 2023 Northern Spirit 2145RBX using 2 of the Dexter Trailer Springs Over-Under Conversion Kits #K71-384-00. I will warn you Kalvin this will raise the height of your camper roughly…

Both the Equal-i-zer Weight Distribution System #EQ37100ET and the Curt TruTrack Weight Distribution System #C17500 are compatible with underslung trailer couplers. I have contacted both manufacturers and received confirmation of this. Both options…

Between the two kits you mentioned the Equal-i-zer part #EQ37120ET is the best choice. This is the highest quality option out there for a weight distribution system and is what Curt tried to emulate with their TruTrack part #C17501. The Curt kit is…

The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…

Hello Ron. I was able to find the instructions for the 12K Equal-i-zer Hitch #EQ37120ET and I have linked those instructions for you below. So, it is a slightly higher rated hitch, but the instructions will be the same. As far as your 2024 Jayco…

The dimensions I found for your Dometic RM1350 on Dometic's site show it being 64.26" T x 33.69" W x 29.50" D. the closest match to these dimensions we carry is the Everchill RV Refrigerator w/ Freezer Drawer - 16 Cu Ft - 12V -…

That is definitely a feature which worries me about the B&W Continuum Weight Distribution System #BW78FR. While there is not a specific measurement I can give you as the bars move up and down depending on the load placed on the bars, B&W…

The best way to power an electric A-Frame jack is with a trailer mounted battery and use the 12V accessory power feed from the trailer connector to provide a maintenance charge to the battery. If that isn't possible, the only other acceptable…