Installation: etrailer Trailer Hitch Receiver on a 2023 Mazda CX-5 Video

The best hitch for a 2024 Mazda CX-5 is the etrailer item #e98902. This hitch is custom fit and bolts to your Mazda with included hardware. This hitch is custom fit and bolts to your Mazda with included hardware. The etrailer hitch item #e98902 is a…

Thanks for reaching out, Jimmy! It looks like Lippert has had a few different designs for their Level Best controllers over the years. If you can send over the information on any tags for your system or even some pictures of any stickers on the…

In order to install the etrailer Trailer Hitch Receiver part #e98902 on a 2022 Mazda CX-5 you'll need the following: - 3/4" Socket - 19mm Socket - Ratchet - Tape - Flathead Screwdriver - Pliers - Torque Wrench - Pry Bar

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I do have a suggestion, because we have a gas strut with with dimensions that are the same as the Stabilus 654150 which is likely to work; the Stabilus strut measures 26.46" when extended with 120 lbs of force. The nearly identical strut we…

To add a hitch to your 2023 Mazda CX-5, I recommend the etrailer Hitch item #e98902. This is a class III hitch with a 2" receiver. It is custom fit and bolts to your Mazda with included hardware. I really like this hitch because the crosstube…

If you have a GT 2019 Mazda CX-5 GT model you do have to remove a lower rear panel but there is no trimming or cutting required to install the 76138. If you had a non-GT model there wouldn't be anything that would need to be removed. I attached a…

Yes, there is a 2" hitch that will fit your 2023 Mazda CX-5. It is the Draw-Tite Trailer Hitch Receiver item #76138. This hitch is custom fit and bolts to your Mazda with included hardware. I really like the Draw-Tite hitch because it installs…

The Sherpa 2.0, part #SH22G, and the NV 2.0 Base, part #BA22B, are the 2 inch models that fit a Class III hitch with no adapter. Also, they do both includes locks for the rack to the hitch and for the bikes to the rack. One difference is that the NV…

If you take a look at the accompanying photo, which was sent in by a customer, you can see the part that needs to be removed when installing a trailer hitch like the Draw-Tite #76138 (which has a 2" receiver) on your 2018 Mazda CX-5 GT. This is…

For a 4-way that fits your 2023 Mazda CX-5 you would want the Curt #C45FV which installs easily and is very reliable. The #18144 is compatible with this 4-way and basically any 4-way out there, but with that said the trailer wiring that fits your…