Step-By-Step Installation Tutorial for the etrailer Trailer Hitch Receiver on a 2016 GMC Terrain Video

In order to determine if a 2020 GMC Terrain has the factory tow package you will need to take a look in the rear fuse box on the driver side of the vehicle. In the fuse box there will be two locations you need to check, K2 and K3 which are for the…

If the vehicle frame has surface rust where the hitch would mount that's pretty normal and would be fine. If the frame has enough rust that the frame is basically starting to deteriorate then I can't recommend you install a hitch. The Curt…

Most likely the outside edge of your trailer tire is wearing because of an issue you are having with the suspension of the trailer. Check the suspension for worn out components or holes that are egg-shaped instead of round where the suspension…

The hitches like the etrailer part #e98865 for your GMC Terrain do come with install bolts that are size 1/2-13 x 1 3/4 and M12-1.75 x 40mm. We installed this hitch on a similar 2014 Terrain like yours with the included hardware that you can see at…

The etrailer Trailer Hitch Receiver #e98865 you ordered for your 2017 Chevrolet Equinox includes 2 carriage bolts that are 1/2-13 x 1 3/4 and the 6 bolts with hex heads are M12-1.75 x 40mm. Make sure that you are using the bolts with a hex head and…

I looked up the hardware on the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #36408 as well as the etrailer 2 inch #e98865 which are both a confirmed fit for your 2011 Chevy Equinox. The weldnuts from the factory are M12…

Given the age of your 2010 GMC Terrain you can safely assume that there will be rust and/or dirt trapped in the threads of the weld nuts on the frame. You can use a spray lubricant product like WD40 or PB Blaster along with a stiff bristle brush to…

I am not totally sure what you are trying to install that is having issues with the bolts fitting but if it's a weld nut on vehicle that you can't get hitch hardware to thread into it's rust/dirt in the threads that need to be cleaned…

What you mention is pretty common. In areas where salt and other corrosive chemicals are used on the roads in the winter, corrosion and other goop can get built up in the nuts that are welded up into the frame to receive the bolts. An easy way to…

The etrailer Class III Trailer Hitch Receiver #e98865 referenced in your question is confirmed to fit your 2012 GMC Terrain. Please just let me know if this is not the hitch model that you have. This particular hitch does include six M12-1.75 x 40mm…

For your 2012 GMC Terrain, The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13591 the M12-1.75 x 40mm hex bolts are confirmed to fit the weld nuts of your vehicle frame. If you are having a difficult time getting the bolts to…

The M12-1.75 x 40mm hex bolts that come with the etrailer.com Trailer Hitch Receiver #E98865 should fit the weldnuts on your 2009 Chevrolet Equinox as they have been tested and confirmed to work with your specific vehicle. A lot of times weldnuts get…