Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel Video

The attachment bolts for a 5-bolt brake assembly like the part #AKEBRK-6R should be torqued to 30-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers flatten out, you'll be pretty darn close…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I did some digging on your AL KO 7,200 lb axle and it has bearings #28580 and #25580 which means you have a 99 spindle. The only hub we offer that will fit this setup is the part #99865UC3 which is a similar Titan hub but has an 8 on 6-1/2 inch bolt…

The correct set of replacement brake assemblies for your AxleTek 12 inch assemblies is the kit part #AKEBRK-7-SA that you referenced. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self…

The 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e44SR you're referring to is made in the China.

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

We carry both the Left #AKEBRK-7L-SA and Right #AKEBRK-7R-SA Electric Trailer Brake Assemblies to replace your AXLETEK-12-GG,

Self-adjusting trailer brakes like the Axle Technology #AKEBRK-7L-SA and #AKEBRK-7R-SA do require an initial manual adjustment as you noted but after that they will automatically maintain the correct pad pressure with normal driving. The auto-adjust…

While we do not carry any custom-fitted hitch receivers that will fit your Keystone Raptor toy hauler, we do have universal fits that will. For the best route, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide…

Given the GVWR you provided, your Forest River Wildcat would use a 12 inch brake assembly like the #AKEBRK-6 you'd looked at. I'd recommend you go with a self adjusting brake assembly instead, like part #AKEBRK-7-SA. After installation,…

It's basically just a brand difference. Dexter trailer brakes are often considered to be the best around so we recommend them highly, but for a great self-adjusting assembly at a lower price you really can't go wrong with the etrailer.com…

For your 7K Lippert Axle I'd go with the etrailer #AKEBRK-7-SA you were looking at. They will be a direct replacement, and will include both sides for one axle, if you have two axles, you're going to need two of these. I really like the…