Installation: etrailer Trailer Hitch Receiver on a 2020 Ford F-150 Video

I would be happy to help you. The etrailer Trailer Hitch Receiver item #e63TR is a confirmed fit for your 2019 Ford F-150. The wiring harness you will need to add a 7-way connector to your truck is the Curt T-Connector Vehicle Wiring Harness with…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I had our warehouse measure the Convert-A-Ball Interchangeable Ball Set #105TB you were looking at and the threaded shank measures 3" long as you can see in the included diagram. This should be plenty long for you to use a 3/8" thick sway…

None of the hitches we offer for the 2017 Ford Explorer would install so that the receiver tube extends through the bumper like the factory hitch would. The hitches offered by our suppliers would install so that the receiver tube would sit directly…

The correct Bestop TrekStep Truck Bumper Step for your 2023 Ford F-150 is the part #BE37KV. This fits both the driver and passenger sides so if you want to add one to both sides you'll need 2 of these. Attached is a review video of this step as…

A little bit of play is acceptable, the coupler should be tight enough that the coupler won't come off the ball, but not so tight you can't close the latch. I typically tighten the coupler up until I feel a slight resistance when closing the…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

I verified directly with Curt for you that the correct 4-way wiring harness is following: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56370

I checked with Yakima and they list the Yakima SkyBox NX 16 Rooftop Cargo Box #Y95AV as a confirmed fit for the factory crossbars of your 2010 Subaru Forester. I attached a review video for this cargo box for you to check out as well.

The distance from the hitch pin hole to the center of the hitch ball of the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR that you referenced is 13-1/4 inches.

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…