etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates Installation - 2019 Ram 1500 Video

The Blue Ox Avail Non-Binding Tow Bar #BX7420 and etrailer XHD Non-Binding Tow Bar #e67ZR are fairly similar but have a few key differences. The first difference being the weight capacity, the #e67ZR has an extra 500lbs of capacity over the #BX7420.…

According to the owner's manual of your 2020 Chevy Silverado 1500, Step 11 of the instructions to dinghy tow, it says: "If the vehicle has an ignition key, keep it in the towed vehicle in ACC/ACCESSORY to prevent the steering column from…

The tow bar I recommend if you want to safely tow your 2014 Jeep Wrangler Unlimited around tight or sharp corners is the Blue Ox Avail Tow Bar #BX7420. The self-aligning arms telescope to automatically center and lock in place, and the wide arms…

We used to but Blue Ox stopped offering it to us so we stopped carrying it. It was basically replaced by the Blue Ox Avail part #BX7420 which is also a 10k rated tow bar but with longer arms to help improve turning radius when flat towing. Check out…

The Blue Ox Avail part #BX7420 is a great tow bar that would work well for you. They make adapters to allow the tow bar to be carried level for situations like yours where the height of the vehicle and RV hitch aren't the same. Most likely you…

I do have a tow bar solution for you, but the first thing that you will need to be able to tow your 1999 Jeep Cherokee with the D Rings is an adapter. Since most cars usually install base plates for flat towing, we will need to use an adapter, like…

I can help you with all the parts you will need to flat-tow your 1999 Jeep Cherokee. To flat-tow your Jeep Cherokee, you will need a base plate kit, tow bar, lighting or wiring, safety cables, and a supplemental braking system. There are a few…

If your 2007 Winnebago Voyage has the Kwikee Level Best Hydraulic RV Leveling System then you will need the Replacement Lippert Touchpad for Kwikee Level Best Hydraulic Leveling System item #LC68UD. This is the correct replacement touchpad for Kwikee…

Roadmaster has D-Ring adapters for their base plate kits like with the #RM-035 for a 3/4 inch thick D-ring, part #RM65FR for a 1 inch D-ring adapter that is extended or the part #RM-035-1 for a 1 inch thick D-ring standard length. This would work…

You'll want to use a silicone lubricant for your etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates #e74ZR. I recommend using the Roadmaster LubeMaster Dry Silicone Spray Item #RM-747 for this application.

The etrailer SD Non-Binding Tow Bar #e74ZR you reference is not compatible with the Adapter for Jeep D-Ring Bumper Mount #RM-035-1. Instead, you'll need to use a Roadmaster tow bar like the Roadmaster Nighthawk All-Terrain Tow Bar #RM-676, which…

Your 1986 Jeep CJ-7 uses a combined lighting system, meaning the turn signals and brake lights run on the same wire, so a converter would not be required to install a trailer wiring harness. You could use the Draw-Tite 4-Pole Hardwire Kit, #18252, to…