Fifth Wheel and Gooseneck Wiring Harness Installation - 2006 Ford F-350

content loading

Customers compare pk11893-50 to these similar products




Products Featured in this Video





How to Install a Fifth Wheel and Gooseneck Wiring Harness on a 2006 Ford F-350


Today on this 2006 Ford F350, well be installing the Pollack T-One connector part number pk11893-11932. We will start off at the bumper of the vehicle where you will find the previously installed 7 pole with a gray locking tab on it. We will undo the lock and pull the 7 pole free, but first we will need to loosen this bracket here for more working room. With everything separated we will start installing the T- One harness and lock it into position. Now that we have made our connections underneath we need to go ahead and drill a hole so that we can mount our connector in the bed. It is recommended that you have a minimum five inch clearance behind where ever you are going to drill.

Now we will take the other end of our new wiring harness, feed it up behind the fender and out the hole we just drilled. With our wiring through the hole we can now put it in our new connector. Following the numbers and colors listed in the instructions, you want to match it up to the numbers that are on the back of your connector. Make sure you press them in firmly so they lock in place, give it a little tug to make sure. You want to make sure you do the center pin before you complete all the others first.

With all of our wires in place we can go ahead and install our locking tab. Now with all of our wires installed and our locking tab in place we can go ahead and put our connectors together and push in on our gray locking tab to secure it. With all of our wires connected we can go ahead and secure our new 7 pole connection, I am going to use self tapping screws. That completes the installation of our new Pollak 7 pole connector. .


Questions and Comments about this Video

Info for these parts were:

Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Nicholas E
Test Fit:
Nicholas E
Employee Brent H
Test Fit:
Brent H
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.