Install: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket on a 2018 Chevrolet Traverse Video

Hey Paul, the most similar weight distribution shank we have to the part #RP69FR that fits a 2-1/2 inch hitch is the part #BPH75RR which fits the same heads as the Reese shanks so it will also work with same heads.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I recommend the Curt Echo Wireless Trailer Brake Controller - 1 to 2 Axles - Proportional Item #C51180. If the dealership is installing the 7 pole connector, this controller doesn't require any additional wires to be ran inside the vehicle. Your…

Before you can install a trailer brake controller in your 2022 Toyota Highlander you'll first need to make sure that you have a 4-pole wire harness for your lights installed and then a 7-way wire harness to get your brake function. If you…

A weight distribution system does not increase a hitch's tongue weight capacity. Rather, it takes weight off of the tongue, helping loads stay stable and level. In other words, if you use a trailer without a weight distribution system with a…

Yes. You can use your existing weight distribution hitch with the Gen-Y Torsion 2 Ball Mount #325-GH-1324 without any additional components, but it is not the optimal setup. Gen-Y recommends that you use the Gen-Y Torsion Weight Distribution Shank -…

By using the Reese Shank #RP69FR instead of the shank that comes with the Fastway e2 Weight Distribution #FA94-00-1000 you'll be lowering the drop from 3-1/2" to about 7-1/4". Since each towing setup is unique I can't tell you right…

I highly recommend getting a weight distribution hitch with sway control, and the best option for your Forest River travel trailer with a loaded tongue weight near 500 lbs is from Equal-i-zer: - Equal-i-zer Weight Distribution with 4-Point Sway…

I checked with our vendors and the only option to purchase the relay you need for your 2022 Nissan Frontier is to get the Curt T-Connector Vehicle Wiring Harness item #C56225. This includes the necessary relays that Nissan leaves out when building…

We currently do not have any installation videos for the Redarc Encapsulated Power Diode #RED34FR being used to install the Redarc Tow-Pro Liberty Brake Controller #RED24FR with the Harness #RED69FR and Panel #RED48FR for any vehicles or your 2021…

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…