DIY Install: K-Source Snap & Zap Custom Towing Mirrors on your 2022 Chevrolet Tahoe Video

When it comes to installing custom towing mirrors on your 2023 Chevrolet Tahoe I recommend The K-Source Snap & Zap Custom Towing Mirrors #KS49NQ. I recommend these mirrors over the universal fit mirrors because the custom mirrors will have a…

For the weight capacity, you do not technically need a weight distribution system. However, due to the design of the trailer, I do recommend using a weight distribution system for the sway control features as the crosswinds or passing vehicles may…

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

Hello Dan, So long as your 2024 Toyota Tundra 1794 does not have extendable mirrors then yes, the K-Source Snap & Zap Custom Towing Mirrors #KS48NQ will indeed fit.

The K-Source tow mirror set part #KS49NQ would not scratch the mirrors of your vehicle as they are padded and custom fit for your mirrors. It's best to make sure the vehicle and the tow mirrors are as clean as possible before installing them…

The towing mirrors I recommend for your 2021 Chevy Tahoe is the K-Source Snap & Zap Custom Towing Mirrors #KS49NQ which slip on over your OEM mirrors. I'm not aware of any replacement extending/folding upgrade mirrors for a Tahoe but this is…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The K-Source Snap & Zap Custom Towing Mirrors #KS49NQ are going to add roughly 4" past the edge of your mirror to the edge of the new mirror. Unfortunately the only width dimension I could find on your 2021 GMC Yukon is the exterior width…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The K-Source Snap & Zap Custom Towing Mirrors #KS49NQ install and remove easily by hand from your 2021 Chevy Tahoe but they install snug enough that they won't pop off while you're driving around. As long as you aren't being careless…

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…