K Source Universal Clip-On Towing Mirror Installation - 2014 Infiniti QX60

content loading

Customers compare ks3891 to these similar products




Products Featured in this Video



How to Install the K Source Universal Clip-On Towing Mirror on a 2014 Infiniti QX60


Today on our 2014 Infinity QX60, we're going to be doing a test fit on the K-Source Universal Clip-on Towing Mirror, part number KS3891. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer or a camper. As you can see I'm visible in the towing mirror but the factory mirror. If I take a few steps in towards my trailer as you can see there's no blind spot by the way we have it set up, but this is the view you get with just your factory mirror. The mirror itself can be adjusted to most things.

We've got our up and down, diagonal, and side to side. By removing the Philip's head screw from the back, we can take the mirror out and turn it to the horizontal position for a different view. Each one of our clips is not going to interfere with the operation or movement of our mirror, and we can even still fold it in. Here on the back side it uses two ratchet straps to hold it in place. You can see how it's got a nice tight fit so it's not going anywhere. It also features rubber pads so we don't have to worry about it scratching or harming the finish of the back side of our mirror.

Down here I'd also like to point out we've got a little camera here for a side view on our vehicle, and it's not covering that up either. One of the best things about this towing mirror is is that it's for temporary use, so if you do a lot of towing or not a lot of towing, it's easy to install and remove. One other great thing is that it's universal, so if you have any other trucks or SUVs in the family, it may fit those as well. Now, the mirror does come in a quantity of one, so if you'd like to pick one up for the passenger side, just use the same part number. Now I'll show you how easy it is to get installed. To begin our test fit, let's go ahead and turn our mirror over.

We need to make sure that each one of our clips here is pulled out so we can easily fit it around our housing. Now it's going to go between the mirror and the housing both on the top and bottom, so I'll turn it back over and set the bottom in place and then I'll set the top in place. I've just got it centered up with my mirror here. Now when we run our straps we want to make sure that the rubber pad here contours the back of the mirror just like that, so we're going to put it on in this direction. We'll just use that top hook and clip it on top.

We'll run the strap underneath and clip it the same on the bottom. Then I'll come up to my cap and then start ratcheting it down. If you'd like to you can adjust your strap as you're tightening it and make sure it seats where you want it. Looks pretty good. Now we can just repeat the same process with the second strap. Now when we're doing towing and we wish to release the tension, underneath our cap here we've got a little button. By pressing that in we can guide that strap out. For right now let's go ahead and connect it on top and then bottom and get it nice and secure. Now we're ready to tow, and that's going to complete our test fit on the K-Source Universal Clip-on Towing Mirror, part number KS3891 on our 2014 Infinity QX60.


Questions and Comments about this Video

Info for this part was:

Test Fit:
Joe V
Test Fit:
Cole B
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Hayden R
Test Fit:
Savanna B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Adam E
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Patrick B
Video by:
Alan C
Video by:
Jonathan Y
Video by:
Robert C
Video by:
Aidan B
Video by:
John S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.