K Source Universal Clip-On Towing Mirror Installation - 2018 Toyota Highlander

content loading

Customers compare KS3891-2 to these similar products




Products Featured in this Video




How to Install the K Source Universal Clip-On Towing Mirror on a 2018 Toyota Highlander


Speaker 1: Today on our 2018 Toyota Highlander, we're going to be test fitting K-Source's Universal Towing Mirrors. Part number KS-3891. You can also get these in a quantity of two with part number KS-3891-2.As you can see here, I'm clearly visible on our factory mirror, but as I take a step towards the outside, I'm no longer visible on our factory mirror, but I can still be seen on our Universal towing mirror. This is particularly useful when merging onto the highway, changing lanes or during parking maneuvers.This large Universal mirror can adjust both up, down, left, and right. You can also rotate the mirror to have the longer length be vertical by loosening the screw located on the back side. Once you've got it where you want it, just tighten the screw back down.While the mirror is installed, your factory mirror can still be adjusted in all directions.

With the mirror installed, the breakaway function can still be utilized without contacting anything. It's held on using two straps in the back. These rationing straps have large rubber pads that'll keep it tight up against your mirror. They won't cause any scratches or abrasions. They also keep it from sliding back and forth.

While the mirror is installed, you'll still have full function of your mirror side marker.We'll begin our installation by placing the hooks on each arm on our factory mirror. We'll then take the straps, go up the backside and hook it into the top loop, and now we can tighten down our straps. Once you've got it snug, you can use the rationing mechanism to ensure that it gets nice and tight.Once you've got them snug, we can close down our caps. Then you repeat the same process on the other side.That completes our test fit of K-Source's Universal Towing Mirrors on our 2018 Toyota Highlander.


Questions and Comments about this Video

Info for these parts were:

Test Fit:
Joe V
Test Fit:
Cole B
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Hayden R
Test Fit:
Savanna B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Adam E
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Patrick B
Video by:
Alan C
Video by:
Jonathan Y
Video by:
Robert C
Video by:
Aidan B
Video by:
John S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.