Customers compare B202-114 to these similar products
Products Featured in this Video
Today on our 2012 Chevrolet Camaro, well be test fitting the Kuat Beta Folding Two Bike Aluminum Rack for 1-1/4 hitches, part number B202-114. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our pin and lock. At the rear of the shank, well tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over some clearance of measurements. We have about 11-1/2 inches of ground clearance.
Weve added about 6 inches to the overall length of our Camaro. As you can see, we can access our trunk with the cargo carrier in its upright position.If we have some larger items to load, we can pull the pin at the base of the carrier to allow it tilt away from the vehicle. Now well pull the pin at the top of the mast to swing out our dual arms. With these out, weve added about 18-1/2 inches to the overall length of our vehicle. Well undo the cradle straps to expose our cradles.
Grab our bike, place it onto the frame cradles and secure it by tightening down each strap. Now that our bike is all loaded up, were ready to go. That completes todays test fit of the Kuat Beta Folding Two Bike Aluminum Rack, part number B202-114, on our 2012 Chevrolet Camaro. .
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
