How to Set Up Your Malone AirFlow2 Roof Rack on a 2018 Toyota RAV4 Video

While there is a budget roof rack for your 2023 Honda Ridgeline that will work with the Thule Hullavator Pro Kayak Carrier #TH898, the Malone SteelTop Roof Rack #MPG202 will not because no weight can be placed on the portion of the rack that extends…

To lock the Thule Hullavator part #TH898 to your Thule Aeroblade roof rack you'd need the #TH450400. This comes with four matching lock cores. Two that you'd install in the Hullavator and two that you'd install in the roof rack to lock it…

I am sorry if we provided you with bad info here. I believe we made some assumptions about the Malone roof rack that were not accurate. The Hullavator #TH898 is made to work with a square bar roof rack, but it has to be the Thule brand. As you can…

Yes, with the Thule Hullavator #TH898, you will need Thule One-Key System Lock Cylinders - Qty 2 #TH450200.

To lock the Thule Hullavator part #TH898 all you need is a set of two lock cylinders from Thule with part number #TH450200 and you'd be set. This will prevent the expensive rack from being stolen from your roof rack!

The Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs part #TH898 will require two lock cores to secure, the Thule One-Key System Lock Cylinders part #TH450200. If you also want to secure the roof rack to the vehicle using the same…

By '4 Hullavators', I'm assuming you're meaning two sets which would allow you to carry two kayaks. Installing 2 Hullavators for carrying two kayaks will be a tight squeeze on the roof of a RAV4. You'll also need to keep in mind…

After reaching out to Curt on your behalf, I've been told that both the Curt #C66KR and the #C13416 are expected to fit all sub-models. I've included an installation video on a 2020 Toyota Rav4 that should help you with the install.

It is correct you will need at least 4" of bar overhang to use the Thule Hullavator Pro Kayak Carrier #TH898 or Yakima ShowDown Kayak #Y04081 so that the lift assist does not touch the vehicle during the loading process. For the roof rack on the…

The Malone AirFlow roof rack #MPG215 does indeed fit the 2017 Toyota RAV4 with factory side rails. The 2-7/16 inch measurement you have is actually 1/16 inch less than 2-1/2 inches that the roof rack fits.

We recommend that you pull the hubs off your trailer to inspect and repack the bearings every 12 months or 12,000 miles. If at this time the bearings still appear in good condition then there is no need to replace them. There isn't a general rule…

The Malone AirFlow2 Roof Rack #MPG216 that fits your 2018 Toyota RAV4 will absolutely work withe the Thule Pulse Large Rooftop Cargo Box #TH615 with no issues whatsoever. The Pulse will clamp tightly around the crossbars of the AirFlow and at 58…