Setting up the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole on your 2021 Ram 2500 Video

The wiring kit I recommend installing on your 2024 Ram 2500 is the Pollak 5th Wheel / Gooseneck T-Connector #PK11893-11932 which tees in behind the 7-Way at your bumper and installs in your truck bed. I really like the Pollak kit because of how…

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

The cab size really doesn't matter as much as the length of the bed when determining the compatibility of a 5th wheel trailer hitch. Since you have a short bed you will need a sliding hitch, like the PullRite SuperGlide you referenced, in order…

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.

The Replacement Ball Assembly #UF19-001057 that you referenced can be used with an Andersen Ultimate fifth wheel adapter but it has to be used with an Ultra Fab stabilizer like the #UF19-950500 since we can't guarantee it would work on an EAZ…

This sounds like a ground issue. Ground problems normally show up when there is more draw on a system such as when you have the running lights on and then use another function like a turn signal or brake light but can show up any time. Make sure that…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

Yes, the B and W Offset Gooseneck ball part #BWGNXA4085 that you referenced can fit trucks with spray in bed liners. I attached a picture we got from a customer that has a spray in bed liner for you to check out as well.

According to B&W the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part #BWGNRK1020 is about a 2 hour install by a professional. All the Hardware is provided. I have attached the installation instructions so you…