Rampage Custom Towing Mirrors Review - 2014 Jeep Wrangler Unlimited

content loading

Customers compare RA8605 to these similar products




Products Featured in this Video



Review of the Rampage Custom Towing Mirrors on a 2014 Jeep Wrangler Unlimited


Today, on our 2014 Jeep Wrangler Unlimited, we're going to be doing a test fit on the Rampage custom towing mirrors for the driver and passenger side. Part number RA8605. They're going to offer us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer or a small camper. It's also going to work out great during off-roading or rock crawling. Now, if I take a few steps in towards my trailer, as you can see there is no blind spot with the way we've got it set up.

This is the view you'd get with just your factory mirror. The mirror itself can be adjusted to most angles. We've got our up and down, diagonal, and side to side. With the way that it clips onto our housing on both sides, it's not going to interfere with the operation or movement of our factory mirror. We can even still fold it in. Here on the back side, you can see how it's going to contour the angle of our factory mirror.

It just uses one hook and loop strap with a clip to help it remain in place. It's pretty solid. What makes this towing mirror different from other towing mirrors is . is that it's specifically designed to fit your Jeep's mirror. They come in a quantity of two, they're very easy to get installed.

Let's go ahead and show you that now. I'm here on the driver side of my Jeep Wrangler Unlimited. To get started, let's go ahead and place our mirror in position. We've got these two tabs here with the lip on it. We're going to position it in the center of our mirror on the side here.

Just going to push it in place. Then I'm going to grab my strap and run it around the mirror and clip this on to this portion here. Now, we want to make sure that the hook and loop is pulled apart, that way we can easily adjust our strap in and out. With it loose, I'm going to bring that around the back side and hook it in the front. Then I'll grab the other end of my strap, pull it nice and tight, and then reconnect the hook and loop. We're all set. We can go ahead and repeat the same process for the passenger side. That's going to complete our test fit on the Rampage custom towing mirrors for the driver and passenger side, part number RA8605 on our 2016 Jeep Wrangler Unlimited.


Questions and Comments about this Video

Info for this part was:

Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Cole B
Installed by:
Cole B
Employee Jared G
Installed by:
Jared G
Employee Hayden R
Test Fit:
Hayden R
Employee Savanna B
Test Fit:
Savanna B
Employee Matthew S
Test Fit:
Matthew S
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.