Setting up the Rhino-Rack Batwing Awning on a 2013 Jeep Wrangler Unlimited Video

The Rhino-Rack Batwing Awning #RR33100 has 4 segments that come off of the vehicle that are 98" long, and has a 118 sq ft coverage.

We do! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B on your 2024 Chevy Silverado 1500 topper. To get this installed you'll have to put some holes in the topper for the rails, but it comes with sealant and…

The Batwing Awning for Rhino-Rack Crossbars - Driver's Side #RR33100 or passenger side #RR33200 will mount to your Thule crossbars without any additional parts if you have the aero style bars. If you have the square load bars, then there is not a…

Rhino-Rack does have a complete kit with shorter crossbars that still have the tracks for your truck cap. It is the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long #Y02-480B. If you want shorter bars than…

Yes, if you wanted to cut down the length of the tracks of the Rhino-Rack Roof Rack System w/ 2 Sportz Crossbars #Y02-480B you certainly could. The bars come 54 inches in length and the tracks are 63 inches long.

Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.

I went out to our warehouse to take a few measurements on the Rhino-Rack Mounting Kit for Batwing and Foxwing Awnings #RR31103. The brackets have an overall width of 2-3/8 inches. The shorter portion has a length of 3-3/4 inches down to where it…

Not a stupid question at all! Manufacturers of different products typically don't like to comment on fitment with other products so it can be difficult to confirm fits at times. While I don't know the dimensions of your ARB awning, I do have…

The Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B could install on the roof of your 2020 Ford F-150 but you should note this will require permanent modification to the roof of your vehicle. I'd much rather recommend the Rhino Rack…

For the Thule Caprock Platform Truck Bed Rack for Crossbars #TH65YE you can use the LED Light Bar Mounting Brackets for Rhino-Rack Pioneer Platform Rack #RR43173. This bracket kit will install into the T-Tracks on your platform rack and will provide…

Rhino-Rack confirmed that their Batwing Awning #RR33200 can be mounted on round Yakima roof rack bars using the adapter kit #RR31105 that was designed originally for use with their now-discontinued Foxwing awning. For a secure fit the Batwing…

The closest option we have is the Rhino Rack part #Y02-500B which gives you a similar aero shaped crossbar setup that has 65 inch long crossbars. The bars are through-bar style which means they stick out past the feet of the rack.