bing tracking image

Rhino Rack Roof Rack Review - 2017 Honda Civic

content loading

Customers compare RRVA126S-2 to these similar products

Products Featured in this Video

Review of the Rhino Rack Roof Rack on a 2017 Honda Civic

Today in our 2017 Honda Civic, we'll be taking a look at and showing you how to install The Rhino-Rack roof rack system. This is going to consist of part numbers RRVA126B-2. That's going to be our Rhino-Rack Vortex Aero crossbars. These are also available in silver with part number RRVA126S-2. The Rhino-Rack 2500 series legs for the crossbars, part number RRRLKVA and part number DK453. That's going to be our custom-fit kit for our roof rack legs. The Rhino-Rack Vortex Aero crossbar system is going to be an aerodynamic crossbar system that allows you to carry any kind of vehicle accessory on your vehicle's roof, whether those are roof-mounted bike racks, cargo baskets, or ski and snowboard carriers.

If we remove the end cap of our crossbar, you'll see our weather strip on the top. That, along with the aerodynamic shape of our bar, is going to help to reduce wind noise and drag. We can also easily remove our weather strip and cut this down to accommodate channel-mounted accessories. The end caps on our crossbars also have the option to remove our plastic lock core and put in the metal one. You can find that at

It's part number RRVA-LEC4. The foot pack for our crossbar kit also the option to lock it to help prevent thefts and tampering of your crossbar system as a whole. Lastly, the custom-fit kit that comes with our vehicle is going to have rubber at any portion that's going to make contact with our vehicle. That's going to help to prevent scratches or abrasions from our roof rack system onto our vehicle. This kit total has a 165-pound weight capacity, so you do want to check your vehicle's owners manual to make sure it can withstand that much weight. Everything you see here on this table is what's included with our kit. We have our foot pack here with our locking covers and the key is just above that.

We have our end cap for our crossbar with our included key, our fit kit for our roof rack system. That's going to be our rubber bottom piece. Then we'll have our clamp here and we have our included tool. This is going to be a torque tool to let us know how much torque we have behind our bolt and then we've provided our own flat tape measure. To start our install, we're going to take the bottom portion of our foot pack off. We're going to attach our rubber piece.

We're just going to squeeze those two pieces together until it's completely sealed and tight. Then we can place it onto our foot pack. Next, we'll remove our bolts here. We'll take our included clamp, place it over where we just removed our bolt, and start to tighten that back down. We want to tighten our bolts up just enough so that our clamp doesn't come loose from our foot pack. We're going to take the square nut on the bottom of our foot pack and slide this into the channel and we can take our measurement before the placement. This is going to be 12.8 centimeters. Once we have that in place, we'll take our included torque tool and we'll tighten down this bolt, here. Double check that measurement. Now we're ready to open up our doors and load this up onto our vehicle. With our doors open we'll take our crossbar and we're going to place it over the top of our vehicle. The crossbar spread's going to be from the middle of our front clamp to the middle of our back clamp, and that's going to be 70 centimeters. Once we have those in the correct spot, we can take our included torque tool and we're going to start to tighten down our bolts. I'm going to tighten it down so that our clamp is sitting just up against our door frame. Now we'll go back and forth tightening these down evenly, making sure that whatever we do to one side we do to the other. Now, we'll know we have enough torque behind our bolt when this skinnier portion of our torque tool is straight, just like you see there. Now we'll close up our doors and we can place on our locking end caps. We've got our crossbar end caps locked into place. We'll take our locking covers for our foot packs and lock those up. Now would be a good time to load up any roof-mounted accessories, and you're ready to hit the road. That's going to be our completed look at the Rhino-Rack roof rack system for our 2017 Honda Civic.

Questions and Comments about this Video

Does it fit for 2016? Thanks
Etrailer Expert
Reply from Jon G.

This setup does fit the 2016 model Honda Civic as well!

Info for these parts were:

Employee Dustin K
Video Edited:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Charles A
Video by:
Charles A
Employee Evangeline M
Test Fit:
Evangeline M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.