bing tracking image

Roadmaster Battery Charge Line Kit Installation - 2020 Jeep Wrangler Unlimited

content loading

Customers compare RM-156-25 to these similar products




Products Featured in this Video



How to Install a Roadmaster Battery Charge Line Kit on a 2020 Jeep Wrangler Unlimited


Shane: Hi, I'm Shane with etrailer.com. Today I'm going to walk you through how to install Roadmaster's battery charge line kit on your 2020 Jeep Wrangler Unlimited.Adding a battery charge line kit to your vehicle, in my opinion, is a must. Typically you're going to see them used on vehicles that are being flat towed behind a motor home. What it's going to do, it's going to allow you to charge your battery while the vehicle is being towed. I've been in a situation where I have been going on a road trip and we get to where we're going and the battery is dead. We had to find someone with a jump box to jump our vehicle.

It was kind of embarrassing. This is going to keep you from having to do that.What it's going to do, it's going to plug it into the back of your six pole plug. It's going to run up to your battery and allow you to trickle charge your battery from your motor home so that when you get where you're going, you don't have that embarrassing moment where you had to rely on somebody else to jumpstart your vehicle because it's dead.Another reason why this charge line is important is any vehicle that is being flat towed by law is required to have a braking system. That braking system has to get power from the battery. With your charge line being attached to your battery, your braking system, using that battery power charge line's going to maintain that battery charge again so you get where you're going.

You don't have to rely on somebody else to jump start your battery or jumpstart start your vehicle.The installation process on this is very simple. You're going to have one long red wire and you're going to have a circuit breaker. Six volt plug on the center pin. You're going to attach your red wire and you're going to route it up to your battery. What I did is ran it right up behind my passenger side headlight right up here.

You need to mount your circuit breaker, it's going to come with self tapping screws. Red wire going down to the plug goes on the copper post. Red wire going to your battery, goes through the silver post. When you cut those, they're going to come with ring terminals, add your ring terminals on, run your wire over. Add your second ring terminal, put it on the positive side of the battery, and it's as simple as that.

Once you get it installed, you're ready to go.Again, I'm Shane at etrailer.com. That's going to do for a look at and our walkthrough installation on the Roadmaster battery charge line kit on your 2020 Jeep Wrangler Unlimited.


Questions and Comments about this Video

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Bradley B
Test Fit:
Bradley B
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee David F
Video by:
David F
Employee Michael B
Video by:
Michael B
Employee Jacob H
Video by:
Jacob H
Employee Jeff D
Installed by:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.