bing tracking image

RoadMaster BrakeMaster Custom Seat Adapter Installation - 2016 Jeep Wrangler Unlimited

content loading

Customers compare rm-88130 to these similar products




Products Featured in this Video



How to Install the RoadMaster BrakeMaster Custom Seat Adapter on a 2016 Jeep Wrangler Unlimited


Speaker 1: Today in this 2016 Jeep Wrangler Unlimited, we'll be having a look at and showing you how to install the Roadmaster BrakeMaster Custom Seat Adaptor, part number RM-88130. Here's what our seat adaptor bracket looks like installed. This is a quick and easy solution when we want to use the Roadmaster BrakeMaster supplemental braking system in our Wrangler. This will allow us to easily hook up without having to do any modifications to the floor board of our vehicle. This is a simple bolt and go operation.We'll start by clamping our BrakeMaster to our brake pedal. We'll slide the clamp up, wrap it around our pedal, make sure it clips on securely.

We'll fold the latch over and we'll secure the latch into place with the pin and pull back on the cylinder. You need to make sure the tabs line up with the adaptor post and we'll install the pin, clip it in place. Now you can see how easy it is to use. We don't have to worry about drilling any holes in the vehicle in order to use our BrakeMaster. This will utilize the factory hardware that holds our seat in place so we have secure and stable braking operation.You're going to have a very good braking system without having to worry about having a portable braking system or have something that's permanently attached to your pedal at all times.

This'll give you the most amount of foot room as you're driving your vehicle down the road normally. Just as easy it is to get the BrakeMaster installed with this bracket, it's just as easy to remove. Just pull your pin and under your pedal clamp, under your air line if you have it hooked up, for demonstration purposes, we're not. Just like that, you have full access to your brake pedal again and with nothing in there in the way.To begin our install, we'll be working on the driver side of our vehicle right in front of our driver's seat. We'll take our seat adaptor bracket.

This is the bottom side of it. We have this beveled hole. We'll insert our provided beveled Allen bolt, flip it over. We'll install our provided lock washer and we'll take the mounting post from our BrakeMaster and we'll screw it on. We want to have it in this orientation here where this faces away from the long end.

So we'll hold that still with a pair of pliers and we'll tighten the bolt down just enough to flatten out the lock washer. With it in this orientation, we can now install it.We'll now remove the two front bolts from our driver's seat, these are 18 millimeter. We'll take our adaptor bracket, place it over those holes and we'll reinstall our bolts. Now we'll tighten those bolts down and just like that, we have our adaptor bracket installed.That completes our look at and showing you how to install the Roadmaster BrakeMaster Custom Seat Adaptor, part number RM-88130 on this 2016 Jeep Wrangler Unlimited.


Info for this part was:

Employee Joshua S
Video Edited:
Joshua S
Employee Dustin K
Video Edited:
Dustin K
Employee Brent H
Test Fit:
Brent H
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.