bing tracking image

RoadMaster Falcon Tow Bar Installation - 2020 Jeep Wrangler

content loading

Customers compare RM-522 to these similar products

Products Featured in this Video

How to Install the RoadMaster Falcon Tow Bar on a 2020 Jeep Wrangler

Clay: Hey guys, how's it going Clay from And today we'll be taking a look at Roadmasters all-terrain tow bar on our 2020 Jeep Wrangler.So our tow bar is going to be one of our main six components for our flat tow. So we have our tow bar, our base plate, our braking system, our wiring, and our brake light switch. So the all-terrain tow bar is great. We have a really wide turning radius. It's non-binding.

So when we get to the campsite or when we want to hook up, if they are in a bind, you just flip this lever and the arms will be free.Our tow bar is going to have channels along our sides. So we're going to use straight safety cables and a straight umbilical cord. What this does is it keeps all of our wires from hanging down on the ground, which looks better behind our vehicle and keeps her wires and chains from getting tangled up underneath. And all the materials on our tow bar here are going to be corrosion resistant, which means it's going to hold up really good over time. So now that we've gone over some of the features, I'll show you how to get it installed.To start our installation of our tow bar.

We'll slide our shank into our receiver tube, and then we can move our tow bar down. You'll push back and you can pull this little tab down, release the arms. Then you can separate them out. They will be kind of stiff at first, just cause they haven't been used. And then we can put our arm into our base plate.

We can take our pin, slide it through, and this will be the same for both sides. So that's going to do it for a look at and installation of the Falcon tow bar all-terrain on our 2020 Jeep Wrangler..

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Bradley B
Test Fit:
Bradley B
Employee Zack K
Video by:
Zack K
Employee Kathleen M
Video by:
Kathleen M
Employee Alan C
Video by:
Alan C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Jacob H
Video by:
Jacob H
Employee Aidan B
Video by:
Aidan B
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Mike H
Video Edited:
Mike H
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.