SMI Stay-IN-Play DUO Braking System Installation - 2011 Honda CR-V Video

Hey Timothy, you are off to a great start for flat towing components for your 2011 Honda CR-V with the Roadmaster Direct Connect Base Plate Kit part #RM-521559-5 and the Roadmaster Night Hawk part #RM-676. I wouldn't say this tow bar is overkill…

The Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional #SM99251 is going to be connected to your vehicle's battery to be powered which will drain your vehicle's battery. To keep the battery charged while towing you can…

The NSA Ready Brute Elite tow bar is a pretty iconic system and while we have carried it in the past, that was long enough ago that we don't really have too much information on the system anymore. I will say that while I do like the idea of…

If your battery is draining in two hours you have a seriously major drain on your battery or your battery is bad. You shouldn't have to pull all these extra fuses to preserve battery life while flat towing. It also sounds like your charge line…

Your 2008 Honda CR-V is a popular vehicle for towing behind a motorhome and we can help you get yours all set with the items needed for safe and legal flat towing. The linked overview article has lots of helpful information and is a great place to…

For your 2000 Holiday Rambler Admiral, I recommend the Tekonsha Prodigy P3 #90195 brake controller. To install this, you can use the wiring harness #3035-P. For most applications, the factory plug is located beneath the dash, near the center console.…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

Yes, I will be happy to tell you what you will need to flat tow your 2007 Honda CR-V behind your motorhome. There are 5 major components needed: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates I recommend…

The first thing you should do is check the bar with a straight-edge to determine if it is bent. If you determine that it is straight you will need to disassemble it and clean it. There is a nut on the forward end by the pivots, and a keeper assembly…

The first thing you should do is check the inner arm of the Falcon II #RM-520 you have with a straight-edge to determine if it is bent. If you determine that it is straight you will need to disassemble it and clean it. There is a nut on the forward…

No as the SMI part #SM99251 is designed to recognize the difference between turn signals and stoplights when determining if the brakes or just the blinkers are being applied. I attached an install video for this braking system on a similar 2014 Ford…

We do carry the base plates for your 2006 Honda CRV that will work with the Roadmaster Sterling All-Terrain Non-Binding Towbar with 6 Wire Electrical, item #RM-576. Does your CRV have a brushguard or front bumper extra trim package?