How to Install the Timbren 1" Spacer For Raised Frame Vehicles on a 2009 Dodge Ram Pickup Video

The Air Lift 1000 Air Helper Springs for Coil Springs part #AL94VJ are a fit for a 2011 Toyota 4Runner with stock coil springs. If the lift utilizes the stock coil springs then there should not be an issue. If the lift uses aftermarket coil springs…

According to SuperSprings, their SumoSprings #SSR-212-40 is NOT a fit for Diesel equipped Colorado models. For the Diesel, you'll want to the the #SS85FR which has the identical capacity. If you click the provided link, you can see a product…

The original kit that you have #TFR1504D for your 2013 Ford F-150 should have come with a couple of spacers so then you would need three of the 1 inch spacers per side for a total of 6 spacers, #A25723-90AH00. That will equal to 4 additional inches…

I'm impressed you are able to tow a fifth wheel trailer level with a 6 inch lift as normally that makes the truck too tall, but to answer your question the best solution would be a Timbren kit with a 6 inch spacer to make up for the lift space…

The #AL24JQ will fit your lifted setup on your 2023 Toyota Tundra. However, I would not count on them for off-road use. I'm afraid they would not last and rip off of the end plates. It also would not be covered under their warranty if they were…

If you are experiencing sag while towing then we have some great options for a 2021 Ram 1500. This is a common problem even for those towing within their capacity. The most popular fix and what I recommend is installing a set of suspension…

I reached out to my contact at SuperSprings about the SumoSprings Solo Custom Helper Springs part #SSR-121-54 for a 2016 Ford Transit T350 chassis and they stated that the gap between the spring and contact point can vary by application as this…

The correct Timbren kit for a 2004 Dodge Ram 2500 with slide-in camper is the Timbren Rear Suspension Enhancement System part #T94VR. I confirmed this with Timbren for you. This is the model designed for service applications.

To add a 1" spacer #A25723-90AH00 to the Timbren Active Off-Road Bumpstops #TABSOSR you were looking at for your 2014 Toyota Tundra you will need to purchase two grade 5 or 8 3/8" x 2-1/2" F/T UNC bolts from your local hardware store.…

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

If you're wanting to install the Timbren #TFR350SDJ on your 2022 Ford F-350 then you'll want to measure the distance from where your factory bump stops are installed down to the point of contact on the axle. The Timbren #TFR350SDJ are…

Thanks for all that info and we can get you exactly what you are needing. Since you have a 2-3/8" axle that would be a 3,500 lb axle, so you want leaf springs rated for that weight. The concern with springs that exceed the rating of your axle is…