Setting up the Curt Trailer Hitch Receiver on your 2006 Dodge Ram Pickup Video

For your 2008 Dodge Dakota I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #75251. It is a confirmed fit for the 2005-2011 model years. The Class III receiver is capable of supporting 500lbs of tongue weight and trailering 5,000lbs with a…

On a 2005 Dodge Dakota the Draw-Tite Class III 2 Inch Hitch, part #75251, will have a 5000 lb towing weight capacity and can be increased with the addition of a weight distribution system. The towing capacity of your Dodge Dakota is listed at 7000…

The Draw-Tite Class III hitch you referenced, part #75251 would work perfectly on a 2007 Dodge Dakota, it fits 2005-2011 Dakota trucks. If you'll be using the hitch for towing, you might need the following items to complete your towing set-up.…

If you have the factory tow package, you can use part #32145. If you do not have the factory tow package and do not have an existing 4-pole and you want to wire up your vehicle for a brake controller, you will need the T-One Vehicle Wiring Harness…

For your wife's 2005 Dodge Dakota, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part #75251 which is a Class III hitch with a 2" receiver tube opening. As long as you do not have a factory trailer hitch then this option will…

I spoke with my contact at Curt, who tells me that some Ram trucks, even though they were manufactured as pickup trucks were assembled using the spring mounts from the cab and chassis trucks. The Cab and Chassis truck spring mount would extend below…

The factory hitch of your 2006 Dodge Ram 1500 has to stay on to install and use the Curt hitch part #C15809 that you referenced. You will need to install the bolts back through the hitch so that you can install the Curt hitch. If you wanted to do…

For a 2006 Dodge Dakota that does not have the factory tow package you will need to hardwire in a trailer brake controller. The first thing you will need is a 4-Way trailer wiring harness, #118323. If the truck already has a 4-Way you will not need…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…