etrailer.com Trailer Hitch Installation - 2012 GMC Sierra Video

The etrailer Trailer Hitch Receiver part #e98849 will be an excellent replacement hitch option for the factory hitch on a 2012 GMC Sierra 1500. It will provide a direct bolt-on swap with no drilling required. It's rated for up to 10,000 lbs which…

The etrailer brand #e98849 hitch which is a confirmed fit for your 2010 Silverado. The hitch installs using 6 bolts, two of which use nuts that are welded up into the holes closest to the rear of the frame as shown in the provided diagram. Two…

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

Good question, and there is just a single difference between the Curt and etrailer trailer hitches that fit your 2010 Chevy Silverado 1500, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75521 is indeed a confirmed fit for a 1999 Chevrolet Silverado 1500. It mounts to bolt holes 39" on center.

There are many trailer hitch options for a 2003 GMC Sierra, the most notable difference between them is class rating. In general, the higher rated trailer hitch options will use more or stronger fasteners but that is not always the case as you have…

The bolts you mentioned are secured by nuts that are welded to the truck's crossmember. Before loosening them, you'll want to spray them down with a spray lubricant. The Draw-Tite #75521 is a fit for your 2009 Chevy Silverado. You can see an…

The Brophy Hitch Extender with Step #ST12 will reduce your hitch (tongue) weight capacity - including the tongue weight - by 1/3 and has a maximum towing capacity of 3,500 lbs and tongue weight capacity of 350 lbs. For example, if your 2007 GMC…

The best trailer hitch for your 2008 GMC Sierra 2500 will vary depending on what you're going to use it for and possibly whether you have an 8 ft. or 6-1/2 ft. bed. If you need to haul a lot of weight I would suggest the Curt Class V CD…

For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part #CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part #CE10305G and the Roller Shaft with…

There certainly wouldn't be any negative effects from using two self-centering keel rollers like the CE Smith Keel Roller part #CE29505 although some might say it's redundant.

From what I understand of the 2010 Chevy Silverado, you first will need to release the connector and housing from the bumper. Pull it out, wiring and all, just enough that you have a little room to work. The housing should then just be able to be…