Set up: Curt Trailer Hitch Receiver on a 2012 Mercedes-Benz Sprinter Video

I would be happy to help you find a hitch receiver for your 2021 Mercedes-Benz Sprinter 2500 van with a factory step. In order to haul a trailer you are going to need a wiring harness as well. The Curt item #13358 you were looking at is the best…

We do indeed have a Blue Ox Brand Base Plate that will fit your 2023 Ford Bronco With the OEM modular bumper. The part you are looking for is #BLU23XR. This is made specifically with the OEM modular bumper in mind and will undoubtedly be a good fit.…

Yes, the Curt Trailer Hitch Receiver item #13358 does fit the 2022 Mercedes-Benz Sprinter 2500 with the factory step bumper. This hitch is custom fit and bolts to your Mercedes with included hardware. We have not heard of any issues with the rear…

The Curt hitch part #13358 that you referenced fits the long and short wheelbase versions of your 2016 Mercedes Benz Sprinter 2500 with the factory step bumper. To determine if your spare carrier will fit past the bumper when this hitch is installed…

For your Sprinter 2500, I recommend the Curt Trailer Hitch Receiver #13358 that will do a great job for your bike carrier and more should you decide to tow later. This hitch model is designed for either the 144" or 170" wheelbase Sprinter…

We do have a trailer hitch fit for your 2016 Mercedes Benz Sprinter 2500 that has the factory step bumper. The Curt hitch part #13358 would be what you need. This fits either length wheelbase as well. In the picture I attached you can see the hitch…

Thanks for the pictures! The best hitch for your 2023 Mercedes-Benz Sprinter 2500 is the etrailer item #e82TR. This hitch is custom fit and bolts to your Mercedes with included hardware. This is a class III hitch with a 2" receiver. It has a…

If the bolts on your Curt Trailer Hitch Receiver - Custom Fit - Class III #13358 are a little over torque that is not a big deal and should not pose an issue. If you don't feel good about it and would rather just replace the hardware, you are…

Since your 2019 Freightliner Sprinter has the standard bumper the Draw Tite hitch part #75549 that you referenced is the correct fit. It also will not interfere with your rear spare either.

Though we have not yet done an install of either the Draw-Tite #DT72MR or the Curt #C55WR on a 2021 Mercedes-Benz GLA250, I did mange to find a couple pictures of each hitch installed. With that being said, you are correct in that the Draw-Tite will…

What you see in the pictures for Curt trailer hitch #13358 is the factory step bumper that comes on some Sprinter vans. There is probably an aftermarket version of it out there but we do not carry it. It is attached separately from the vehicle on the…

The Curt hitch part #13358 is recessed under the step bumper like you can see in the attached picture but it's not recessed to the point it wouldn't work well. It wouldn't interfere with the camera setup either.