How to Install: Curt Trailer Hitch Receiver on your 2019 Ram 1500 Classic Video

For your 2021 Ram 1500 Classic I recommend the Curt Trailer Hitch Receiver - Class IV #14374 for a few key reasons. This hitch is made right here in the USA, and in our experience the powder coat finish found on the Curt hitches holds up the best…

I can certainly help you out. The TW is the tongue weight. This is the weight of the trailer at the coupler that attaches to the ball mount on the trailer hitch. It should be 10 to 15 percent of the GTW or gross trailer weight. The gross trailer…

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

When we have reached out to Tekonsha about this same situation for a 2019 Ram 1500 they said that the connector for the adapter #3024-P is actually located behind the center console area and that you'll need to reach behind the dash (from the…

As for towing capacity, the hitch will work fine. However, the tongue weight you provided will be an issue with this hitch. Tongue weight is usually 10 - 15 percent of the trailer weight, in your trailer's case, between 495 - 750 lbs. If your…

Yes, it will. The etrailer Hitch item #e98852 is confirmed to fit the 2018 Ram 1500's that did not come with a hitch from the factory. This hitch is custom fit and bolts to your Ram with included hardware. I really like the etrailer Hitch item…

The cap should fit back on after installing the #e98852 on your 2020 Ram 1500 Classic. Not only should it fit, it should fit fairly easily. This is rare but it has happened to a few people. What I recommend, and what worked for them, is loosening the…

The etrailer Trailer Hitch Receiver #e98852 measures 7-3/4" from center of hole to center of hole on the back plate. The holes are 1-1/2" to the center of the hole from the top of the receiver on the back plate(see image).

When trying to figure out the maximum towing capacity on a vehicle such as your 2020 Ram 1500 Classic Warlock, you are limited by the lowest rating between the trailer hitch receiver and the vehicle. From some research I did online I found that with…

The best aftermarket brake controller you can buy is the Tekonsha Prodigy P3 Trailer Brake Controller item #90195 which will outperform the factory brake controller tenfold. The Tekonsha Prodigy P3 is extremely reliable and even if something were to…

The Draw-Tite Front Mount Hitch you referenced, part #65063, does indeed protrude through the bumper. Based on your email stating the use of a winch, and ground clearance concerns, my recommendation would be this hitch. I spoke with my source at…