Set up: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2013 Honda Odyssey Video
Customers compare 118521 to these similar products
Products Featured in this Video
How to Install a Trailer Wiring Harness on a 2013 Honda Odyssey 118521
Today on our 2013 Honda Odyssey, we'll be installing the Toe-ready T1 connector, part number 118521. To begin our install we'll first go ahead and pull the latch for the drivers side rear third row seat and lean it forward, so we can gain access to the rear fuse panel. Then using a flat-blade screw driver we'll go ahead and get underneath the fuse panel, and remove the fuse panel door. Go ahead… see more >
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Video by:
Andrew K
Video by:
Zach D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.