Curt T-Connector Vehicle Wiring Harnes Installation - 2013 Honda Odyssey Video

You could use the 4-way with 35 foot lead part #A35W42b as a harness that would replace all of the wiring you need.

The only way we offer to install a 7-way in your 2013 Honda Odyssey is with an adapter like part #ETBC7 as there isn't a direct plug in harness available. You would need to start with a 4-way if you don't have one already. For that you would…

Since you plan to add the Curt Custom Fit Trailer Hitch Receiver, #C13068, to your 2013 Honda Odyssey for the purpose of towing, the owner's manual states you must carefully observe the load limits (I have attached a snapshot of the manual) and…

The best hitch I would recommend for your 2013 Honda Odyssey the EcoHitch part #306-X7253 as it has a mostly hidden appearance, is the 2 inch hitch size which is the most popular and has best capacity. Other options are going to hang down below the…

If you used a circuit tester such as #PTW2993 to check the signals going into the converter box of wiring harness #C56378 and there is no voltage, quickly double check to ensure that the plug-in connectors are secure. Try unplugging them and then…

The distance between the mounting holes of the Erickson wheel chock kit part #EM98CV from left to right on center are 4-1/2 inches.

Yes, the Erickson ATV E-Track Tie-Downs #EM98CV includes wheels chocks and straps for four wheels and will accommodate vehicles weighing in at 3000lb maximum with tires between 10" and 30" in diameter. Since your 2006 Kawasaki Mule 3010…

I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the e-track. Without knowing any…

The correct screw/bolt size for the Erickson ATV E-Track Tie-Down Kit #EM98CV is 1/4". The best hardware will depend on your exact application and the material and thickness you're attaching these too. If your mounting surface is no more…

Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the necessary…

You will need 1/4" bolts for the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set, part #EM98CV. The length of the bolts will depend on your trailer, but I 2" bolts will work for most…

8 inches of rise would be exactly what you'd need to tow your trailer level as long as the hitch measurement you took was from the top of the hitch opening to the ground. For that we have the part #C45112 which has 8 inches of rise and would work…