bing tracking image

Ventline White Plastic Enclosed Trailer Vent Cover Installation

content loading

Customers compare BV0554-01 to these similar products

Products Featured in this Video

How to Install a Ventline White Plastic Enclosed Trailer Vent Cover

Today on this enclosed trailer, were going to install part number BV0554-01 from Ventline. This is their white rounded dome. To start off well go ahead and remove the trim panel at the very bottom and also the crank handle as well. Next well go ahead and remove the screen. Now well go ahead and then unscrew the crank assembly from the crossbar and then we can go ahead and release it from the lid. Well slide the arm down towards an open slot at the bottom and then we can go ahead and release it.

We got completely loose from the crank, now well go up top and go ahead and remove it from the vent. As you can see theres a small tab on the inside edge of the hinge that we have to line up, so we can slide it off. Now we can go ahead and slide on our new vent cover. Well slide it into place and then basically reinstall it in reverse order. Well go ahead and put our crank assembly up into place and line up the arm with the vent dome, put it into track and then well go ahead and reinstall the crank arm to the vent.

Then we can reinstall our screen and then our trim ring around the edge. In just a few steps the old one has been removed and our new one has been installed. Okay, with that, thatll finish it for part number BV0554-01 on this inclosed trailer. .

Questions and Comments about this Video

Walter H.

This was very helpful. Thank you for being there when I needed help. God bless

Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Andrew L
Video Edited:
Andrew L

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.