Customers compare Y02098 to these similar products
Products Featured in this Video
Today on our 2013 Chevrolet Equinox well be test fitting the Yakima Forklift Roof-mounted Bike Carrier, part number Y02098.Now, with our vehicle already equipped with a roof-rack, were ready to fit the forklift to the vehicle. Well place the bike rack on top of our crossbars and align the two mounts with our crossbars. Here on the front, well bring the head of the bike rack directly over the front crossbar and make sure that the clamp goes underneath.We can then use the wing nut to slide the bolt through the clamp and tighten it down. Well then slide the back of the head forward to lock the front wing nut in place. Well move to the back mount where well make sure that the clamp goes underneath the crossbar and tighten it down.Well then install our skewer. With the skewer in place and opened up ready for the fork of our bike, well make sure that our rear wheel strap is undone and out of the way.We can then place the bike into the bike rack making sure the front fork falls into the skewer.
Well then tighten the skewer down securing the bike to the bike rack.Well move to the back wheel where well put the strap through the wheel and secure it on the other side.Thats it, our bike is loaded, were ready to head on down the road. That completes our test fit of the Yakima Forklift Roof-mounted Bike Carrier, part number Y02098, on our 2013 Chevrolet Equinox.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
