bing tracking image

Yakima Roof Rack Review - 2018 Mazda CX-5

content loading

Customers compare Y00146 to these similar products

Products Featured in this Video

How to Install the Yakima Roof Rack on a 2018 Mazda CX-5

Speaker 1: Today, on our 2018 Mazda CX5, we're going to be doing a test on the Yakima Core Bar Roof Rack system. We'll be using part numbers Y00421 for the 50 inch long, Seal Core Bars. Part number Y00146 for the Yakima Baseline Towers. Part number Y06130 for the Yakima Base Clip Fit Kit, and part number Y06154 for the other Base Clip Fit Kit.This Yakima Roof Rack System is going to allow you to carry roof mounted accessories on your Mazda CX5. Things like bike racks, kayak carriers, cargo boxes, and much more. It's going to work with your standard clamp-on accessories.

However, it will not accept your T-Track accessories, because its solid.The Core Bars are supported by four Yakima Baseline Towers. They're padded so they won't harm or scratch our CX5's roof. The Fit Kit is also padded so it does not harm or scratch the inside of our door. Now, one great feature is, the Baseline Towers feature a cover, so it hides our hardware. That way, it's going to deter anyone from removing it from our CX5.

Now, if you like to, the covers have a plastic core that you can knock out so you can add the Yakima SKS Locking Cores.Next, we're going to give you a couple measurements. This is going to give you an idea of how high your Roof Rack actually sits above the vehicle. From the top of the roof to the under side of the bar is about three inches. From the top roof to the top of the bar is about four inches.Now, when we go over features, I'll go ahead and show you how to get it set up. Now, I've already got my front cross bar in position.

Per our instructions, we need to take a measurement on each side from the corner of our windshield up to the beginning portion of our Baseline Towers. Once we've got that set, we have our position for our front Cross Bar. Our rear Cross bar installs very similar. Let's go ahead and do that together.I've got one side already completed. Let's do the other side.

We'll first start off by taking our Baseline Tower, we want to take this plastic piece here, and fit it in the center. Now, we'll line it up and push it into place and it should snap right in. Just like that. Then we'll take our Core Bar Fit. We're going to line that up with the bolt in the center. We're going to hold it place and we're going to turn it over, and we're going to be turning our attention to this opening here. As you can see, it's not open, so we want to open this door here. And, that's going to make it visible.Let's go ahead and start tightening this up. We don't want to tighten it down all the way. We just want to loosely install. That way, we can slide it on to the bar. Since we're here. Let's go ahead and take our pad and put it in place. We want to be sure that the notched out portion is facing away, like you see here. There's also a little arrow, we want to make sure that's facing away. Once you've got it snapped in, we can slide it on to our Core Bar.Now, it's very simple. Simply line it up, and slide it in place. And, while we're here, let's go ahead and place on our end cap. Then, we can turn it over.We need to make sure we have the correct distance between the two. You can find that in your instructions. Once we've got it set, we can take our included tool and tighten up this bolt here. Now also, per our instructions, we need to make sure that we've got it set in the middle of these three settings. Go ahead and tighten it up, and our included tool is going to tell us when we've got it properly torqued by listening for three clicks.Now we've got this front setting we need to have. It's going to be our tow position. Our other one is our pitch. You can see how it moves like so. It too, needs to be set in the center. And, go ahead and get three clicks out of our tool there. Then, we're ready to set it in place, on top of our Mazda CX5.Now, you want to be sure your doors are opened up. We can set it in place in the general area. Now, you want to be sure that the round portion of the bar is facing forward as you see here. Then, we need to take a measure, which is found in our instructions. We need to be sure and measure from the front of the Cross Bar, to the front of the other Cross Bar.We need to do that for both sides. Now, another thing that we need to be sure of is that our pad is sitting on this flat portion of our CX5 on both sides. We can see here that we are set up perfectly. Now, we can take our hook, we'll open up our door, and we need to be sure we have the correct hook. The front Cross Bar's hooks are different from the rears. Once you've ensured we got the correct one, we want to slide it into this gap underneath, and our bolt on the inside here, is going to catch it so it can't come back out.With it in position, take our included tool, and we're going to come up to this bolt here and start tightening it down. As you can see, it's going to turn the angle of our hook, which is what we want, until it makes contact with our CX5. From there, we then want to make sure that it makes contact underneath so we can then tighten down this bolt here. Let's go ahead and set that up for both sides.With both sides making contact, we can begin tightening it down. It's a good idea to alternate sides. Once you've got it mostly tightened down, you want to use your included tool and listen for those three clicks. After that, you can close up the door. You also want to be sure that the top door is closed up, and then we can put on our cover.Our cover fits in a certain way. We've got these open hinges at the bottom. Those fit here. Roll up, and then snap into position.And, that's going to complete our test fit of the Yakima Core Bar Roof Rack system on our 2018 Mazda CX5.

Info for these parts were:

Employee Zack K
Video by:
Zack K
Employee Jacob T
Video by:
Jacob T
Employee Aidan B
Video by:
Aidan B
Employee Andrew K
Test Fit:
Andrew K
Employee Colin H
Test Fit:
Colin H
Employee Hayden R
Test Fit:
Hayden R
Employee Adam E
Test Fit:
Adam E
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.