bing tracking image

Access Motion Activated LED Light Strip Review

content loading

Customers compare A90392 to these similar products




Products Featured in this Video



Review of the Access Motion Activated LED Light Strip


Today, we're going to be taking a look at the Access Motion Activated LED Light Strip part #A90392. The motion activator is in this little globe here, and it does have an automatic shut off set at about a minute, so once there's no motion, it 'll turn itself off. This is a flexible strip, so you can out this on any kind of contoured surface or maybe around a corner, such as in a toolbox, or in a cargo box, or in a drawer. There's an adhesive strip all along the back of the light, all along there, as well as on the back of this box itself. This strip, itself, with the light is going to measure, of just the light strip, just over 17", with the light box, with the battery box it's going to be about 27" in total. To install the batteries, you have these 4 screws that are Philips head, so just undo those, and it'll take 3 AA batteries. Now to install our Access LED Light Strip, we're here in the back of our pickup, and we're going to install our light along the railing on our Tonneau cover, so that whenever we open the tailgate, the sensor will see that motion and turn on our light.

Once we get a good idea of where it's going to go, it's never a bad idea to clean off your area to make sure it's going to adhere properly. Once you get that cleaned off, peel off the adhesive backing, and then you stick that on there. There are also some holes in this bracket that if you didn't want to use the adhesive backing or you we're on a surface that it won't adhere to, you could drill, use some self tapping screws and drill this in, but we won't need to do that for our application today. Again, I just want to make sure that I've got it about where I want it before I take off that backing, and it's the same as before, just peel that off and then really press it firmly on there. I'm trying to get it as close to the edge of this railing as I can, and this adhesive is nice because it has a foamy layer, so it really contours to where ever you put it and gets a nice solid grip, got a little off there, so I'm going to fudge it up closer. Now as you can see, without the light, it's hard to see in the back of our pickup bed, if we activate the motion sensor, now we can get a good view of what we're hauling. That does it for our look at the Access Motion Activated LED Light Strip part #A90392.

.


Info for this part was:

Employee Zack K
Video by:
Zack K
Employee Kathleen M
Installed by:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.