An In-Depth Look at the B and W Tow and Stow 2-Ball Mount Video

You made a great choice with the B&W Tow & Stow, as it is considered by many to be the best ball mount in the industry due to its strength and anti-theft design of the platform. In order to determine which one is correct for your F-250, you…

Out of those two options, I recommend the 3" Drop B&W Tow & Stow 3-Ball Mount item #BWTS10047B for your 2019 Ford F-150. Both the 3" B&W Tow and Stow item #BWTS10047B and the 5" B&W Tow and Stow item #BWTS10048B are…

As long as you secure the Prodigy P2 part #90885 securely and in the correct orientation with the 3M tape you'd be fine. The 3M adhesives are very powerful so this would work fine. I attached a picture that shows the orientation that the…

The Tekonsha Prodigy P3 Brake Controller, #90195, does not have an on and off switch. It will go into sleep mode after several minutes of no activity. The power draw when it is in the sleep mode is so negligible that it will not discharge the…

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

The Tekonsha Prodigy P3 Brake Controller, #90195 will go into sleep mode after several minutes of inactivity, but there isn't an "off" switch for this controller. The power draw when it is in the sleep mode is so negligible that it will…

Yes, you're on the money because the most popular B&W Tow & Stow ball mount for 2 inch hitchers is indeed the one that has a maximum of 5 inches of drop or 5-1/2 inches of rise. There are actually two versions of this, one being a 2-ball…

10 inches of ground clearance from the bottom of your B and W Tow n Stow to the ground is pretty low. I would highly recommend going with the version of your ball mount with 2-1/2 inches of drop instead with the part #BW44FR which would give you 12…

In regards to the B&W Tow & Stow 3-Ball Mount part #BWTS10048B for 5" or part #BWTS10049B for 7", the distance from the top of the shank to the bottom of the upright while the hitch balls are stowed away is 8.5" for the 5"…

The Superwinch gets wired to an ignition switch, so it isn't something that is meant for a boat trailer. The fastest 12 volt electric winch that can be powered with a 12 volt battery with a boat trailer is the Dutton-Lainson StrongArm 12-Volt DC…

The Roadmaster Anti-Rattle Hitch Extender #RM-071-1075 comes with the threaded bolt and pin. This threaded hitch bolt does indeed reduce noise and movement inside the hitch receiver, providing a more secure and quiet connection. However, there is not…

Hello Gary. The B&W Tow & Stow 2-Ball Mount will work on any vehicle with a 2" hitch receiver. If you are asking whether or not it will work with the GMC fold-down tail gate, then answer is no, it will not. Instead, you will want the…