All You Need to Know About the Brophy Cable Camper Jacks Video

We do have something for you. But if when you say standard, you mean the 6-1/2' bed then the answer is no the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLT2307 and #TLR3500 are not what you would want because they only fit the 5-1/2'…

We do have a half kit (or single jack) of the Brophy Cable Camper Jacks - 57" Max Lift Height - 1,000 lbs #CJ31 you referenced. This is found as part #BR29ZR on our site.

The TorkLift Camper Packer Camper Stand Kit with Lumber #TLA7012 will not have holes pre-drilled in the lumber for the brackets and chains. We do offer the TorkLift Camper Packer Camper Stand Kit #TLA7010 as well without the lumber if you prefer to…

I checked with Brophy and the Brophy Camper Jacks #CJ31 have a distance of 3 inches from the upright mast to backside of the bracket that would hold your camper shell.

If you're needing the 67" max lift then you can get two of the 1,500 lb version #CJ74H. Same Max Lift just half the weight capacity. If you do not really need up to 67 inches of lift, you can get the #CJ31 that will have a Max Lift of 57…

There is a way to reuse your existing keys but the Yakima Same Key System (SKS) Lock Cores #Y07202 cannot be ordered to match your keys. What you would need to do is order single lock cores that match your keys. For example, if your key had a number…

I would be happy to help! The only difference between the Brophy Cable Camper Jacks #CJ31 and #CJ41 is the weight capacity. The #CJ31 has a 1000lb weight capacity where the #CJ41 has a 3000lb capacity. Both have the same 17" - 57" lift…

Yes, the Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR is the correct replacement hitch bolt for the Yakima Exo System #Y82VR. The #Y52FR is the same as part number 8880953.

The correct Brophy Truck Bed Camper Tie Downs for a 2022 Dodge Ram 2500 is part #TDSF. Then for the turnbuckles you can use the Brophy Basic Turnbuckles part #TDHP. This is a complete, cost effective setup for securing a truck bed camper. The listed…

There is no danger of the Brophy Cable Camper Jacks #CJ31 flipping the camper over when you are using them; you just need to ensure they are properly used and aren't overloaded past their 1,000 lb (combined) capacity. These jacks have a tripod…

I measured the inside diameter of the Replacement Tripod Base for Brophy Cable Camper Jacks #1106 and found it was 2 inches. This base is a replacement for the Brophy Cable Camper Jacks - 57" Max Lift Height #CJ41 and 67" Max Lift Height…

There isn't any type of special removal available for a stuck Yakima lock core, as it sounds like you tried the only remedy that we generally suggest, which is a lubricant. Otherwise, the only way to remove it really is by having it drilled out;…