Comprehensive Review: Brophy Ball Mount for 2" Hitches Video

The ARK #ORJW500D Off-Road Swing-Up Jack weighs in at about 32 lbs. The fully retracted length from the center of the pivot the the bottom of the wheels is 11.22 inches. The same distance when fully extended is 18.89 inches, as you can see in the…

Since you are not getting the 12V power when your truck is running, you most likely don't have a fuse issue as you stated their isn't a specified fuse or relay in the owners manual. The issue is that your truck is computerized even at the…

The interior lights of your enclosed trailer are likely connected to the 12V (Auxiliary) power pin on the 7-Way of your trailer. You can verify this by applying 12V power from a separate battery to this pin and seeing if that supplies power to your…

When the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU is in the forward position the wheel can move only one direction and it can keep moving forward without the handle moving it. It wouldn't roll back if in forward but if you were…

When fully retracted, or collapsed the jack is 28.58 inches tall, and 38.42 inches tall when extended as shown in the provided diagram. I've linked you to a product description video featuring the #ORJW1SU ARK Extreme Off-Road Ratcheting Trailer…

The ARK #ORJW1SU Off-Road trailer jack will need about 21-3/4 inches of available space on the trailer tongue. I wasn't able to make out the dimensions on your tape measure in the photo, so I couldn't say judging by that if it'll fit.…

The Extreme Off-Road Ratcheting Trailer Jack part #ORJW1SU has a 770 lb weight capacity which means so long as the tongue weight of the trailer does not exceed this then you'd be fine. A trailer with GVWR of 4,000 lbs would be no worry at all.

With the ARK Xtreme Off-Road Swing-Up Jack #ORJW500D in its lowest position it is 6.49" from the center of the mounting point to the top of the jack. The other end of the jack when fully retracted is going to be 18.89" from the mounting…

One of the longest ball mounts we offer is the Brophy ball mount part #BM20. This ball mount is 13-1/4 inches long from the center of the hitch pin hole to the center of the ball hole and has a 10,000 lb capacity. Without knowing how much capacity…

I do have options for you but the longer you extend the connection point from the trailer hitch, the less capacity you will have. That said, they do not offer a ball mount that is 16" long (center of hitch pin hole to center of ball hole) and…

The Brophy Ball Mount for 2" Hitch part #BH20 weighs around 17 lbs. If you're looking for a lightweight option we offer the Brophy Ball Mount for 2" Hitch part #EA20 which only weighs around 5 lbs.

Sounds like you need an extended ball mount. The Hidden Hitch Ball Mount item #80232 you were looking at would definitely give you plenty of turning clearance. It measures 15-3/4" from center of hitch pin hole to center of ball hole and has a…