bing tracking image

Brophy Hitch Reducer Trailer Hitch Receiver Review

content loading

Customers compare HT02 to these similar products




Products Featured in this Video



Review of the Brophy Hitch Reducer Trailer Hitch Receiver


Today I will be taking a quick look at the Brophy Hitch Reducer from a two inch to an inch and a quarter. This is part number HT02. We'll go ahead and show you how it performs. Here at the back of our ATV, our ATV does have a two inch hitch, which is installed on the back of our chassis. The adapter sleeve is going to work really well, because it allows us to install and inch and a quarter accessory onto our ATV. You can see that it has two pinholes here in the sleeve and that's going to allow us to actually slide it into the shank of our two inch hitch. Our hitch reducer does come with a half inch hitch pin, which is going to be used to install the sleeve to our two inch hitch. This is a great way to install an inch and a quarter accessory.

For example, if you have a two inch receiver installed on your ATV, but you have other inch and a quarter accessories, this little adapter sleeve is a great way to just slide it into your hitch instead of having to switch out receivers. You can see it is coated in a black powder coat finish that is going to help resist rust and corrosion. Now we have this other pin which is a standard 5/8 inch pin and clip that are sold separately. That's going to install your two inch accessories. For example, there is one pin that does come with this and that pin is usually designed to secure the sleeve to the receiver so that you will need an anti-rattle device or some sort of hitch pin and clip to secure your accessory. Now you can see that we have our inch and a quarter accessory, we're going to slide the shank into the tapered end of our sleeve. Now you can see that it's going to have a smaller diameter on one side of the sleeve and it's going to have a regular two inch diameter on the other side.

We'll slide this in and basically just line up the hitch pin hole with our accessory and the hitch pin hole with our adapter sleeve. Now that we have our accessory installed, we'll go ahead and show you how it performs. Now to complete today's review of the Brophy Hitch Reducer from a two inch hitch to an inch and a quarter, part number HT02. .


Questions and Comments about this Video

Info for this part was:

Employee Matthew K
Installed by:
Matthew K
Employee Brandon M
Installed by:
Brandon M
Employee Cole B
Installed by:
Cole B
Employee Alan C
Video by:
Alan C
Employee Chad S
Video Edited:
Chad S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.