bing tracking image

Camco RhinoFLEX Rhino Blaster Adapter for RV Holding Tanks Review

content loading

Customers compare CAM39085 to these similar products




Products Featured in this Video



Review of the Camco RhinoFLEX Rhino Blaster Adapter for RV Holding Tanks


Today we'll be taking a look at the Camco RhinoFLEX Rhino Blaster Pro Adapter for rinsing RV holding tanks, part number CAM39085. The Rhino Blaster Pro lets you easily flush out your RV's holding tank and sewer hose with a common garden hose. The bayonet and lux swivel fittings make it easy to connect with your RV's holding tanks and sewer hose. The blaster pro forces water into your plumbing lines to break up clogs and release soot. The include vacuum breaker prevents any contaminates from getting back into your water source. The gate valve allows you to hold water in your tank and release it as needed.

It's made of a polypropylene and polycarbonate construction so it's going to resist cracks and breaks. It's got a 360 degree swivel so it will work in any configuration. It's going to work with any of your standard three inch RV sewage fittings. Now that we've gone over the features, we'll go ahead and show it you how it works. First off, any time when you're working with the RV sewer system, we recommend that you use the Camco Sanitation gloves, and that's going to part number CAM40287. We'll go over and undo the cap on our black water tank.

We can grab our CAMCO RhinoFLEX Blaster adapter. We'll line up our notches on our tank. We'll twist it in place and make sure it locks in, just like that. Next we need to make sure the nozzle valve is closed, which it is, in this position here. Let's connect our sewer hose.

We'll bring that up. We'll do the same as before. We'll line up the notches and lock it in place. The other end is going to go to your dump station. Now we can open up our valve to drain our gray water and our black water.

For demonstration purposes, I'm not actually going to pull my gray and black lever today. Once our water is drained, with our vacuum breaker in place, we can hook up our hose. Once our hose is hooked up nice and secure, we can turn our water source on, open up the nozzle, close off our valve, and the tank will begin filling with water. Once the tank is full, we can open up our gate valve, and let it drain into our dump station. We'll continue to rinse until the water runs clean and we can repeat the process as needed. When we're all done, we can turn off our water source, close the valve. Once we're all done, we can turn off our water source, close our nozzle, close the gate valve, and then disconnect. That's going to complete our look at the Camco RhinoFLEX Rhino Blaster Pro Adapter for rinsing RV holding tanks, part number CAM39085. .


Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.