bing tracking image

Convert-A-Ball Pintle Mounting Bar Review - 2014 Ford Expedition

content loading

Customers compare AMPC2 to these similar products




Products Featured in this Video



Review of the Convert-A-Ball Pintle Mounting Bar on a 2014 Ford Expedition


Today on our 2014 Ford Expedition, we'll be test fitting the convert-a-ball cushioned adjustable Pintle mounting bar for two-inch hitches. With a total of eight holes, and rated at ten-thousand pounds, it's part number is AMPC2. This eight-hole mounting bar lets you adjust the Pintle height, to level your trailer. Before we begin our test fit, we first need to get our hitch height. This is a measurement from the ground to the inside top of the receiver tube. It's about 20-1/4 inches.

This is going to vary, depending on tire size, hitch style, or load. Now to begin our test fit, we'll start in the drop position. Simply slide the shank of the mounting bar into the receiver tube of our hitch. We'll line up the pinholes, slide in our pin, and secure it with a clip. You can also flip it over into the rise position. Just pull the pin, flip it 180 degrees, put your pin back in, secure it with the clip.

This will give us additional options for height settings. That will complete today's test fit for the Convert-a-ball, cushioned adjustable Pintle mounting bar, part number AMPC2, on our 2014 Ford Expedition. .


Info for this part was:

Employee Patrick B
Video Edited:
Patrick B
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Sue W
Video Edited:
Sue W
Employee Rick A
Test Fit:
Rick A
Employee Matthew K
Test Fit:
Matthew K
Employee Cole B
Test Fit:
Cole B
Employee Randy B
Test Fit:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.