Convert-A-Ball Interchangeable Ball Set: The Breakdown Video

The hitch ball angle adjustment on weight distribution systems is designed to provide more or less distribution of the tongue weight on your trailer hitch to the trailer and vehicle axles. If you adjust the ball angle farther away from the towing…

The Curt Slim Adjustable 2-Ball Channel Mount #C46KR that you referenced has two hitch pin holes that are one inch apart so the first pin hole has a distance of 10 inches from the ball center to the hitch pin and the other is 11 inches.

We do have a hose and regulator that you can use on your Champion 3500 Dual Fuel Generator model #100264. You can use the Camco Automatic Changeover 2-Stage Propane Regulator #CAM59005, which is a direct replacement for the regulator on your…

The Air Lift AirLift 1000 Air Helper Springs for Coil Springs will work in the exact manner you want; improving the ride and how your 2014 Ram 1500 handles when you are towing. These air springs will reduce the strain on your Ram's suspension and…

At most the tongue weight of a trailer would cause about 1/2 inch to 1 inch of sag at the ball mount (give or take a little and different for every vehicle). But on a 2016 Ford F-250 the suspension is potentially beefy enough to limit the sag to even…

If you use the Curt hitch extender part #C45048 in the 24 inch length with a weight distribution system the towing capacity is 8,000 lbs. If the 24 inch length would work for you this would be a great option.

I went out to our warehouse to measure the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank #BA-1 for you. The platform measured 11/16th inches which is the 3/4 inch platform they are referring to. I recommend the #BA-1 for…

According to Convert-A-Ball, although they recommend using the #CABPN-2 3/4 inch pins to secure the #BA-1 it is perfectly acceptable to use 3/4 inch Grade 8 bolts instead of the pins. The only downside is that changing the ball height would be more…

To be on the safe side, we will assume the maximums; trailer weight of 4,000 pounds and tongue weight of 425 pounds. When selecting a weight distribution system, the most important thing is properly matching tongue weights. That being said, you never…

I pulled one of the Ball Mount Adapters, part #BA-1 from our warehouse and took a measurement for you. As the attached photo shows, the center-to-center measurement is 2-1/2 inches. With 3 inch spacing on your shank this will unfortunately not work…

I have just what you need to turn your Equal-i-zer Weight Distribution Shank part #EQ90-02-4800 into an adjustable ball mount. For this, you will need the Ball Mount Adapter part #BA-1, 3/4" Pins with Clips part #CABPN-2, and 2-5/16" Hitch…

Yes, you can use the Convert-A-Ball Cushioned Weight Distribution Shank #AMAC1 without a weight distribution system and it will keep its 10,000 pound weight rating. The Ball Mount Adapter #BA-1 is designed to work with it just for that purpose and is…