bing tracking image

Curt Auxiliary LED Indicator Lights Review

content loading

Customers compare C53201 to these similar products




Products Featured in this Video



Review of the Curt Auxiliary LED Indicator Lights


AJ What's up everybody. It's AJ with etrailer.com. Today we're gonna be checking out the Curt Auxiliary LED Indicator lights. Now you can put these on a bunch of different accessories we've got them installed on our cargo carrier here today. It's a four-pole that plugs in. And then now you have lights that match your taillights on your cargo carrier or bike rack.

Let's check it out. Take a closer look at them. You see the LED lights here. There's LEDs up on the top layer, and then there's going to be a bottom layer of those. Those are going to come on when we activate our taillights or our hazards.

So we're gonna run through the functions real quick right now we're gonna hit the brake lights first. You see how it lights up a little bit brighter that way, matching the brake lights on your vehicle. Then we can hit the hazards. You don't see that bottom one light up too. You see right there, it's lighting up.

That's going to be the flashing function of it. It's right here as well. It's going to attach via a four pole. So we have our vehicle wiring here, plugged in. And you're gonna get 71 inches of cords.

That's going to be more than enough. You see me kind of bumbled ours up here beside is just for demonstration purposes, but you should have plenty of cord. And if you have access, you can roll that up and tie that off right there like that. Now we've run it down. Our cargo carrier, it's got two points to hook up. It's going to be labeled left and right. And they're even color coded. So we have the blue and the yellow. So of course plugged the yellow and the yellow and the blue into the blue. And it's that easy. We come back out here, we've got both of our lights, like I said, that mark left and right now routing the wire's up to you. We you just kind of used some things just to set up as a demonstration today, you probably want to use more zip ties for more permanent on the backside of the lights. There's also some adhesive double-sided tape. You can peel off and that's what we use to stick it. Now we use electrical tape cause we didn't want to rip off that seal on that tape today. We have them on our cargo carrier today. This is going to apply to bike racks as well. There's a lot of people online and say they don't like that their bikes are covering up their taillights and even a cargo carrier, you can stack your gear up and cover up those lights as well. Now I know that this car care has reflectors on there too, but this is going to work in tandem with your brake lights and your blinkers. So this is going to have that functionality. These are going to be way brighter, pop. That way you're gonna have less to worry about people are going to see when you're stopping or where you're turning because it's on the back of your car carrier or your bike rack the LEDs and the housing are going to be weatherproof So you won't have to worry about the elements, getting to them or damaging them. You're also going to get 24 diodes on the inside. So that's what's going to keep it nice and bright. When setting them up and putting them where you want on your cargo carrier or bike rack I would recommend also getting some wire loom from us just to keep things nice and neat on the other side and protect that wire, Make sure it's not going to be issues with cutting. It's just going to protect it for longer. Overall. I think it's going to be a very helpful thing to have on your car carrier or your bike rack, just because if you're already stacking up full of stuff or you have those bikes loaded people can't see your taillights. I'd be a little worried about that. I want people to know when I'm stopping. So there's no issues. This is going to prevent that. That does it. Thanks for hanging out. And I hope this out..


Questions and Comments about this Video

Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.