Customers compare C23519 to these similar products
Products Featured in this Video
Today we're going to be taking a look at Curt's hitch lock for two-inch and two and a half-inch hitches. This hitch pin's going to be great for protecting your accessories. Most accessories don't come with locking pins and many don't even come with a pin at all. Well this way you can ensure that your gears going to stay safe and protected attached to your vehicle.The hitch pin attaches to the… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Jonathan, congrats on the new truck. The 7" drop should be enough, but it is hard to say for sure without knowing what trailer you will be pulling. The 7" drop will get your ball height at 17" or 18" (we measure from the upper…
view full answer...Hey Jake, yes the Yakima Overhaul HD ladder rack part #Y01151-5855 is compatible with Yakima roof rack accessories. It looks like you already bought this though so I am sure you already have found out!
view full answer...Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…
view full answer...Hello Phil. So, yes, the tow bar being out of level can definitely cause the arms to not lock, among other problems. Anything greater than 3" out of level is not recommended for this reason. Fortunately, it sounds like nothing on your etrailer…
view full answer...Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…
view full answer...Most states require the Yakima Rack and Roll Trailer, #Y08106, to be registered, but it registers just like a regular trailer. We provide you with a Manufacturing Certificate of Origin and a VIN number. Take the paperwork provided to your Department…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…
view full answer...As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I have no idea what the exact coupler height of your trailer would be, but typically the range is in between 16-1/2-19 inches in height. The #989900 ball mount kit you'd looked at would have you covered for a 4 inch or a 2 inch drop which would…
view full answer...Yakima has a few different anti-rattle threaded hitch bolt designs and the one you want for your Yakima EXO SwingBase Swing Away Hitch Extender #Y34VR is part #Y52FR on our site. This is the same as the 8880953 you mentioned, it just has our part…
view full answer...