Curt Rebellion XD Shock Absorbing Adjustable Ball Mount Review Video

The Curt 45951 Rebellion Shock absorbing ball mount which we offer as part #C83WR would certainly reduce much of the shock and vibration that's experienced when towing a trailer which would absolutely make towing a more pleasant experience. Much…

I am not totally sure which jack you are referencing but most jacks are designed to be lubricated with white lithium grease like part #L11354.

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

Good question, and we have asked the manufacturer, Ark, this very same question, and they have said there is not any weight rating for the Ark Drop Down Corner RV Stabilizer Jacks - 33" Long Corner Steadies #ARK77FR. They say the reason they…

You certainly can install two pairs of the Ark Drop Down Corner RV Stabilizer Jacks #ARK77FR on your trailer. In that case we recommend adding one jack to each corner of the trailer frame. Keep in mind that these are designed to stabilize, not lift…

We don't offer a combination leveler/stabilizer jack, but if you're wanting something in a stabilizer jack that is very sturdy, you can't go wrong with the ARK Drop Down Corner stabilizer jacks. They're available in a powder coat or a…

Yes, your trailer with corner jacks can still absolutely use the Ark stabilizers: - Ark Drop Down Corner RV Stabilizer Jack Kit - 24" Long Corner Steadies #ARK34FR These will weld to the bottom of your trailer's frame, you just need to make…

The distance from the hitch pin hole to the center of the hitch ball of the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR that you referenced is 13-1/4 inches.

While your Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black #ERT00110 will physically fit the shank of the Shocker Hitch HD Ball Mount #SHK35VR, it will also interfere with the design of the shock absorber. As…

The height of the Curt RockerBall from the base that sits upon the ball mount to the top of the ball is as follows: - 2-5/16 inch ball with 1 inch diameter shank, #C82KR is 4.607 inches - 2-5/16 inch ball with 1-1/4 inch diameter shank, #C29FR is…

I can absolutely help you as there are a lot of standalone options, but we do have exactly what you are looking for, which are the following: - Curt Rebellion XD Shock Absorbing Adjustable Ball Mount with 2" and 2-5/16" Balls #C57UR - Lock…

If your trailer has 7 wires running all the way back to the brakes, then yes, you can tap into the existing wiring. Each of your new brakes will have two wires for the brake magnet. One wire is for 12 volt power to the brake magnets and the other…