Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball: The Breakdown Video

Hi David, The Curt Ball Mount for 2" Hitches #C45030 is approximately 2-1/2" wide. The Reese Sway-Control Bracket #RP26003 can fit ball mounts that are smaller than 2-5/8" wide so these two components would be compatible with each…

Yes, you can install the ball of the Curt RockerBall 2-5/16" Shock Absorbing Hitch Ball and Ball Mount w/ Sway Control Tab #C45WR in the rise position if you wanted which would give you the rise of 3/4 inch that you mentioned.

While there is no way to attach an anti sway system to the Glyder for Gen-Y part #325-GH-12005. I do have a solution for you. You can use the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount part #CAB-UM which isn't as clean looking of a…

Based on how you described it, I'm guessing your 2001 Ford F-350 Super Duty needs a different part than the #C55774, but what does the plug look like? The correct 7-way is going to depend on that, as the Curt option you mentioned is a replacement…

We do not actually do any tests of the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 15K #C83WR because we do not manufacture the item, it is simply a product we offer for sale. As for your other…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C83WR is 12-1/8" long from the center of the hitch pin to the center of the ball. I do recommend using the InfiniteRule Lock Set #IR47FR to secure the ball mount to your vehicle.

Yes, the Gen-Y Torsion weight distribtuion shank part #325-GH-1102 that you reference will work great with your Pro Series weight distribution as it was designed to have same bolt pattern.

The height of the Curt RockerBall from the base that sits upon the ball mount to the top of the ball is as follows: - 2-5/16 inch ball with 1 inch diameter shank, #C82KR is 4.607 inches - 2-5/16 inch ball with 1-1/4 inch diameter shank, #C29FR is…

Hi Jonathan, Sure thing, we can get your 2015 Toyota Highlander set up with a 7-way and brake controller so you can tow your camper. I'll go ahead and list out the parts you need for your Highlander without the factory tow package: - T-Connector…

If you want to just add on some sort of extension you can use Safety Chain Quick Link #C82932 which has a working load limit of 3300-lbs. This will give you about 3-inches additional length. Ideally trailer safety chains will be one continuous chain,…

Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…

The Curt Ball Mount #D-28 is going to be the closest ball mount we have to what you are looking for. This mount is 14-1/4" from center of hitch pin to center of 1" hitch ball hole. It has a 6" drop but with the addition of the…